Miele T 8164 WP operating instructions Cleaning and care, Emptying the condensed water container

Page 23

Cleaning and care

Emptying the condensed water container

The condensed water is collected in the condensed water container.

Empty the condensed water container after every drying programme.

The Empty container indicator light will come on if the maximum level of the condensed water container is reached.

The indicator light will go out when the door is opened and closed again.

Pull out the condensed water container.

To prevent water running out, hold it at the front and towards the back and keep it in a horizontal position when carrying it.

Empty the container.

Replace the container in the dryer.

Condensed water can cause health problems in people and animals.

Do not drink it.

Condensed water can be put to household use (e.g. used in a steam iron or humidifier). To ensure that any residual particles of fluff in the condensed water are removed before use, pass it through a fine sieve or paper filter first.

23

Image 23
Contents Operating instructions Heat-pump dryer 8164 WP Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Contents Correct application Safety with children Technical safety Page Correct use Page Page Page Accessories Control panel Operating the tumble dryerDisplay shows Before using for the first timeDisplay h min Drum lightingDrying Care symbolsLaundry care Tips on drying Turn on the tumble dryer How to dry correctlyBrief instructions  Sort the laundry Start the programme  Remove the laundry when the programme has finished Select a programme Programme duration Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedHand iron, Machine iron Programme overviewCottons Max. load 7.0 kg Normal+, Normal Normal Gentle tumbleMin cool air Minimum iron Max. load 3.5 kg Normal, Hand ironAutomatic plus Max. load 3.5 kg Timed drying Max. load 7.0 kg Min warm airWoollens Max. load 2.0 kg Gentle smoothing Max. load 1.0 kgEmptying the condensed water container Cleaning and careWhen to clean the fine filter When to clean the fluff filtersCleaning them whilst dry Cleaning the fluff filtersWhen to clean Cleaning them with water Replacing them Removing the fine filter Cleaning the fine filterFine filter Cleaning the cover for the fine filter Replacing Tumble dryerCheck and fault messages Problem solving guideThere is a build-up of fluff in the airways Problem solving guideUnsatisfactory drying results Other problems Before starting another programme Problem Cause and remedy Drying processEven switches off Goes on too long orChanging the lamp Dryer basket After sales serviceGuarantee RepairsFront view Installation and connectionTransporting the dryer Rear viewInstallation Washer-dryer stack Before moving the tumble dryer again e.g. when moving houseLevelling the dryer Electrical connection U.K Non-rewireable plugs BSAutomatic plus Consumption dataTechnical data Page  Laundry will be drier SettingsTo check the setting  Carry out steps -  Switch the dryer off after checking  Anti-crease 2 h Anti-crease Anti-crease action off  Anti-crease 1 h Switching the buzzer on/off Clean out airways indicator light will also flash once Off Not in current programme factory default settingStandby  Off  On  Not in current programme factory default settingGentle smoothing Adjusting the dryers electronics for very soft waterPage Page Page Alteration rights reserved/4613 Nr 557 600