Cleaning and care
Replacing |
Fit the filter back on the handle. Make sure it is the correct way round.
To ensure that the filter is positioned correctly in the front of the heat exchanger unit:
First insert the handle with the filter attached over the two guide pins.
Make sure that the yellow dot on the handle is on the right.
Push the filter in completely
Close the access panel.
The filter must be fitted correctly and the access panel closed to ensure that water cannot leak from the condenser system and to ensure that the dryer functions efficiently.
Tumble dryer
Disconnect the tumble dryer from the mains electricity supply.
Do not use solvents, abrasive cleaners, glass cleaners or multi- purpose cleaning agents. These could damage plastic surfaces and other parts.
Clean the tumble dryer with a slightly damp cloth and a mild
Clean the seal around the inside of the door with a damp cloth.
Dry all parts with a soft cloth.
The drum and other stainless steel parts can be cleaned with a suitable proprietary stainless steel cleaner following the manufacturer's instructions.
29