Problem solving guide
Changing the lamp
Disconnect the tumble dryer from the mains electricity supply.
Open the door.
You will find the interior lamp cover at the top of the drum aperture.
Insert a suitable tool* under the side edge of the lamp cover as illustrated.
* such as a wide flat bladed screwdriver
Apply a little pressure and whilst doing so turn your wrist in the direction of the arrow to open the cover.
The cover will open downwards.
The temperature resistant lamp should only be ordered from your Miele dealer or the Miele Spare Parts Department.
The lamp must be replaced with one of the same type and specification. The light specification and maximum wattage is stated on the data plate and on the light cover.
Turn the lamp
Replace the lamp.
To close the cover push it upwards and press it on the left and right until you hear it click into position.
Ensure that it is fitted into position securely, as any moisture could cause a short circuit.
35