Problem solving guide
Problem | Cause and remedy |
The drying process | The temperature in the room may have risen sharply. |
goes on too long or | Air the room to make sure that the temperature is |
even switches off | not too high. |
| Detergent residues, hair and fine fluff can clog the |
| fluff filters and the fine filters |
The cooling ribs can be clogged up.
Clean the fluff filters and the fine filters.
Remove any visible fluff behind the panel in the heat exchanger cavity (see "Cleaning and care").
The cool air intake (bottom right grille) is blocked.
Move any objects, such as a laundry basket, away from the grille.
The fluff filters and the fine filter were still wet when they were replaced.
The fluff filters and fine filter must be dry.
The laundry has not been spun sufficiently.
Make sure that your laundry is thoroughly spun at the appropriate spin speed in the washing machine.
The tumble dryer has been overloaded
Do not exceed the maximum load for the programme selected.
Metallic components, e.g. zips have prevented the dryer from registering the correct moisture level.
Open the zips next time.
If the problem occurs again, dry garments with long zips using the Warm air timed drying programme.
*Before starting another programme:
Switch the dryer off and then on again.
34