Miele T 8164 WP  Anti-crease action off  Anti-crease 1 h,  Anti-crease 2 h

Page 47

Settings

Anti-crease

Helps prevent creasing, if laundry is not normally removed immediately after the end of a programme. The drum rotates at intervals for 2 hours after the end of a programme.

The anti-crease function

is activated when the tumble dryer is delivered. You can shorten the duration of the anti-crease phase or deactivate it if wished.

can be used for all programmes, except Woollens handcare.

should always be switched on.

Follow steps (,,...) to programme and store in memory.

Before you begin, ensure that:

The tumble dryer is switched off.

The door is closed.

The programme selector is pointing to Finish.

Press Start and keep it pressed in whilst carrying out steps -.

Switch the dryer on.

Wait until the indicator light for the Start button comes on . . .

. . . and then release the Start button.

Turn the programme selector to Cottons Normal.

The Empty container indicator light will flash three times.

The option selected will be displayed by a number which will alternate with .

Anti-crease action off

Anti-crease 1 h

(The Clean out airways will also flash once)

Anti-crease 2 h

(The Clean out airways will also flash twice)

Pressing the Start button switches between the options.

Switch the dryer off.

The setting you have selected is now stored in memory. You can change it again at any time.

To check the setting:

Carry out steps -.

Switch the dryer off after checking.

47

Image 47
Contents Operating instructions Heat-pump dryer 8164 WP Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Contents Correct application Safety with children Technical safety Page Correct use Page Page Page Accessories Control panel Operating the tumble dryerDisplay shows Before using for the first timeDisplay h min Drum lightingDrying Care symbolsLaundry care Tips on drying Turn on the tumble dryer How to dry correctlyBrief instructions  Sort the laundry Start the programme  Remove the laundry when the programme has finished Select a programme Programme duration Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedHand iron, Machine iron Programme overviewCottons Max. load 7.0 kg Normal+, Normal Normal Gentle tumbleMin cool air Minimum iron Max. load 3.5 kg Normal, Hand ironAutomatic plus Max. load 3.5 kg Timed drying Max. load 7.0 kg Min warm airWoollens Max. load 2.0 kg Gentle smoothing Max. load 1.0 kgEmptying the condensed water container Cleaning and careWhen to clean the fine filter When to clean the fluff filtersCleaning them whilst dry Cleaning the fluff filtersWhen to clean Cleaning them with water Replacing them Removing the fine filter Cleaning the fine filterFine filter Cleaning the cover for the fine filter Replacing Tumble dryerCheck and fault messages Problem solving guideThere is a build-up of fluff in the airways Problem solving guideUnsatisfactory drying results Other problems Before starting another programme Problem Cause and remedy Drying processEven switches off Goes on too long orChanging the lamp Dryer basket After sales serviceGuarantee RepairsFront view Installation and connectionTransporting the dryer Rear viewInstallation Washer-dryer stack Before moving the tumble dryer again e.g. when moving houseLevelling the dryer Electrical connection U.K Non-rewireable plugs BSAutomatic plus Consumption dataTechnical data Page  Laundry will be drier SettingsTo check the setting  Carry out steps -  Switch the dryer off after checking  Anti-crease 2 h Anti-crease Anti-crease action off  Anti-crease 1 h Switching the buzzer on/off Clean out airways indicator light will also flash once Off Not in current programme factory default settingStandby  Off  On  Not in current programme factory default settingGentle smoothing Adjusting the dryers electronics for very soft waterPage Page Page Alteration rights reserved/4613 Nr 557 600