Settings
Altering the residual moisture level in the "Minimum iron" programme
The tumble dryer is designed to dry effectively using as little energy as possible. However, if you require the laundry to be drier or damper, you can reduce or increase the default residual moisture in this programme.
Follow steps (,, ...) to programme and store in memory.
Before you begin, ensure that:
–The tumble dryer is switched off.
–The door is closed.
–The programme selector is pointing to Finish.
Press Start and keep it pressed in whilst carrying out steps
Switch the dryer on.
Wait until the indicator light for the Start button comes on . . .
. . . and then release the Start button.
Turn the programme selector to Cottons Normal+.
The Empty container indicator light will flash twice.
The option selected will be displayed by a number which will alternate with .
Laundry will be damper
The standard drying level will remain on the Normal setting (factory default setting)
(The Clean out airways indicator light will also flash once)
Laundry will be drier
(The Clean out airways indicator light will also flash twice)
Pressing the Start button switches between the options.
Switch the dryer off.
The setting you have selected is now stored in memory. You can change it again at any time.
To check the setting:
Carry out steps -.
Switch the dryer off after checking.
46