Linear PERS-4200 Series manual Specifications, Power Requirements

Page 40

20. Specifications

CODING FORMATS

DX CODE 24-BIT A1D PPM

1,048,567 Codes

DXS CODE 24-BIT A1D PPM

1,048,567 Codes

POWER REQUIREMENTS

PRIMARY SUPPLY

Plug-in Switching Power Supply

 

Input: 120 VAC 60 Hz

 

Output: 14 VDC 1.7 Amps Maximum

BACKUP SUPPLY

7.2 Volt 2 Amp/Hour Ni-Mh Battery

BACKUP OPERATION DURATION

24 Hours Minimum

BATTERY LIFE EXPECTED

3 Years

RF CHARACTERISTICS

RECEIVER TYPE

Dual-diversity Superheterodyne

RF SENSITIVITY

-105 dBm Typical

RADIO FREQUENCY

315 Mhz

MAXIMUM RANGE

1000 Feet Line-of-sight (Tested with DXS-LRC transmitter)

COMMUNICATOR

DIAL-UP COMMUNICATOR FORMATS

4 x 2,

 

ADEMCO Contact ID

 

SIA

 

UL Tested with SURGARD

 

SGMLRG-DG

 

Central Station Receiver

PSTN DIALING

Tone or Pulse

DIALING / IP REPORTING DELAY

0 or 15 Seconds

IP REPORTING FORMATS

Surgard System III-compatible SIA

 

Surgard System III-compatible CID18 Extended

 

Surgard System III-compatible CID58 Extended

REMOTE PROGRAMMING PASSWORD

6 Digits

REMOTE COMMUNICATIONS PASSWORD

4 Digits

ACCOUNT NUMBER LENGTH

SurGard FIBRO IP (SIA) 10-digits

 

PSTN/SIA 6-digits

 

PSTN/CID and 4 by 2 4-digits.

PRIMARY TELEPHONE NUMBER

20 Digits

SECONDARY TELEPHONE NUMBER

20 Digits

SUPERVISORY TELEPHONE NUMBER

20 Digits

CONSOLE STATUS REPORT

Optional 1, 7 or 30 Day Report

IP ADDRESSING

IPv4 Addressing Only

CONSOLE

OPERATING TEMPERATURE

32°-120° F (0-49° C)

ACTIVITY TIMER PERIOD

Two Programmable Time Windows

PSTN REPORTING AUDIO

Listen-only, 2-way Manual, 2-way Voice Activated (duplex) Speakerphone

IP REPORTING AUDIO

Listen-only or 2-way Manual

SIZE

6.25” W x 2.85” H x 6.25” D (9.6” H with antenna up)

REGULATORY

CONSOLE

Designed to conform to:

 

UL 1635 Digital Alarm Communicator

 

UL 1637, Home Healthcare Signaling Device

 

Smoke Signaling Accessory File S2499 / UL217

 

National Fire Protection Association (NFPA 72)

 

ROHS

POWER SUPPLY

CSA, ETL, FCC, Effi ciency Level 4

EMISSIONS

FCC Part 15 & Part 68, Industry Canada

38

Image 40
Contents PERS-4200 Series Important Pers Installation Warnings Contents Power Supply Product DescriptionVoice Prompts ProgrammingOperation Summary EmergencyActivity FireAlternate Console Labels Remote Speaker/Microphone ModuleHome Button Cover Option Module Installation Power Supply InstallationConsole Connections Telephone ConnectionsProvider Features Console Modes & FeaturesProvider Modes User Features User ModesUsing the Provider Modes Power Off ModeNot-Ready Mode Programming ModeProgramming with RA4200 Software DescriptionSystem Requirements RA4200 can connect to the Console two waysRA4200 Software Installation Programming OutlineTesting the Modem Command and Response modem information. If the modem is notWorking properly, Windows will notify you To Test the Modem in Windows XP10. RA4200 Software Overview Account Template TabsMenu Bar Sub-menus that can be accessed from the Menu Bar areDrop-down Menu Items and Icons Customer Tab Console Tab Temperature Limit Settings Console Time SettingsAnnunciate Trouble Indication Annunciate Status with Home ButtonLow Battery Report Options Sensors TabSensor Zones Sensor Status IndicatorsSensor types selections available are Communicator Fallback Communicator TabPstn Dialing Sequence Internet Protocol IP Reporting Enter the account number for the specifi c ConsoleThree Central Station Pstn reporting formats are available Three Central Station IP reporting formats are availableMode Switch Reporting Reporting Options TabReport AC Fail Report Supervisory EventsSpeaker Phone Timer Two-way Audio Mode2 Alarm Codes Automatic Status ReportsReminder Settings Audio Replay During TimeoutReminder Messages Tab Report Missed ReminderReminder Time Slot Settings Four types of reminder messages are availableCreating or Editing Reminder Messages Test ReminderChoose a reminder message type Console Communication Send/Receive WindowWhen a Console is new or un-programmed it will announce Sending and Receiving Console DataConsole Time and Date First Time Programming for New ConsolesConnecting with the Console Limited Remote Telephone ProgrammingOption 1 Reporting Format Option 2 Primary Telephone NumberSensor Learn / Test Mode Learning SensorsActivate the sensor to learn. The Console will announce Console will announce the next available zone numberLearning a Single Sensor Testing SensorsErasing All Sensors Event Log Retrieving the Event LogPrinting the Event Log Clearing the Event LogPrinting or Exporting a Template Firmware Update Utility Instructions System Firmware Update Utility InstructionsUpdating Console Firmware Upgrade Complete Appendix a Reporting Codes Reporting Code CIDAppendix B Mode Table System EventAppendix C Communications Status Window Table Opening Port COM30Power Requirements SpecificationsLinear Limited Warranty Regulatory InformationIndex #’sSIM ID Copyright 2014 Linear LLC 237016 a