Linear PERS-4200 Series manual Reminder Time Slot Settings

Page 26

Timeout Interval

A 15 or 30-minute timeout interval can be programmed as a setting for all reminder messages. If the reminder message is not acknowledged prior to expiration of the timeout interval, a missed reminder event report can be sent to the Central Station if reporting of missed reminder messages is enabled.

The factory default sets the reminder message timeout to 15 minutes. Alternately, 30 minutes can be selected for the TIMEOUT INTERVAL.

Reminder Time Slot Settings

There are eight standard reminder message time slots that can be programmed and one time slot for the system test reminder. Each time slot has options that can be set.

Slot Enable

SLOT ENABLE check boxes are displayed for each of the nine reminder message time slots. Checking a SLOT ENABLE check box will enable the reminder message that is programmed in that time slot.

A reminder message that’s already programmed can be temporarily disabled by un-checking this check box without loosing the reminder message settings.

Send Report

SEND REPORT check boxes are displayed for each of the eight standard reminder message time slots. Checking a SEND REPORT check box for a reminder message time slot will cause the Console to report a non-acknowledged reminder message to the Central Station.

✓NOTE: For any time slot to report, the global setting for missed reminder reports must be enabled in the Reminder Settings area.

Reminder Type

Four types of reminder messages are available:

•Medication reminder

•Ride reminder

•Appointment reminder

•Alarm

Select the desired type of reminder message for the time slot. When the selection is made, the Schedule Type dialog box will display.

Schedule Type

Viewing or changing the reminder type or schedule type will display the Schedule Type dialog box. This area is for selecting the dates and times that a reminder message will sound.

A reminder message can be scheduled for ONE TIME, DAILY, WEEKLY, or MONTHLY with the Schedule Type selection.

Once a schedule is set, it will be displayed in the SCHEDULE area.

One Time Reminder	Daily Reminder	Weekly Reminder	Monthly Reminder
Schedule	Schedule	Schedule	Schedule

RA4200 Schedule Types

24

Image 26

Contents PERS-4200 Series Important Pers Installation Warnings Contents Voice Prompts Power SupplyProduct Description ProgrammingActivity Operation SummaryEmergency FireHome Button Cover Remote Speaker/Microphone ModuleAlternate Console Labels Console Connections Option Module InstallationPower Supply Installation Telephone ConnectionsProvider Modes Console Modes & FeaturesProvider Features User Features User ModesNot-Ready Mode Using the Provider ModesPower Off Mode Programming ModeSystem Requirements Programming with RA4200Software Description RA4200 can connect to the Console two waysRA4200 Software Installation Programming OutlineWorking properly, Windows will notify you Testing the ModemCommand and Response modem information. If the modem is not To Test the Modem in Windows XP10. RA4200 Software Overview Account Template TabsDrop-down Menu Items and Icons Sub-menus that can be accessed from the Menu Bar areMenu Bar Customer Tab Console Tab Annunciate Trouble Indication Temperature Limit SettingsConsole Time Settings Annunciate Status with Home ButtonLow Battery Report Options Sensors TabSensor types selections available are Sensor Status IndicatorsSensor Zones Pstn Dialing Sequence Communicator TabCommunicator Fallback Three Central Station Pstn reporting formats are available Internet Protocol IP ReportingEnter the account number for the speciﬁ c Console Three Central Station IP reporting formats are availableReport AC Fail Mode Switch ReportingReporting Options Tab Report Supervisory Events2 Alarm Codes Speaker Phone TimerTwo-way Audio Mode Automatic Status ReportsReminder Messages Tab Reminder SettingsAudio Replay During Timeout Report Missed ReminderReminder Time Slot Settings Four types of reminder messages are availableChoose a reminder message type Test ReminderCreating or Editing Reminder Messages Console Communication Send/Receive WindowConsole Time and Date When a Console is new or un-programmed it will announceSending and Receiving Console Data First Time Programming for New ConsolesOption 1 Reporting Format Connecting with the ConsoleLimited Remote Telephone Programming Option 2 Primary Telephone NumberActivate the sensor to learn. The Console will announce Sensor Learn / Test ModeLearning Sensors Console will announce the next available zone numberErasing All Sensors Testing SensorsLearning a Single Sensor Printing the Event Log Event LogRetrieving the Event Log Clearing the Event LogPrinting or Exporting a Template Updating Console Firmware System Firmware Update Utility InstructionsFirmware Update Utility Instructions Upgrade Complete Appendix a Reporting Codes Reporting Code CIDAppendix B Mode Table System EventAppendix C Communications Status Window Table Opening Port COM30Power Requirements SpeciﬁcationsLinear Limited Warranty Regulatory InformationIndex #’sSIM ID Copyright 2014 Linear LLC 237016 a