16.ENGLISH
5 Remove one cutter/comb, at a time, out of frame.
6 Cutter should be held with cutters facing up and brushed in an upward motion. Clean razor comb with long bristles of brush in a circular motion.
7For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g., Norelco Razor Cleaner, model RC1776, or alcohol) and lubricated with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head).
8 While holding Razor Head Assembly in one hand, gently place one cutter/comb back into Assembly.
9Repeat procedure for other two cutting heads.
10Replace frame back into Razor Head Assembly. While
pressing down, turn wheel clockwise to lock frame into place.