Invacare T6 manual Reaching, Leaning and Bending Forward, Reaching, Leaning Backwards

Page 16

SECTION 2—SAFE HANDLING

A Note to Wheelchair Assistants

When assistance to the wheelchair user is required, remember to use good body mechanics. Keep your back straight and bend your knees whenever tilting the wheelchair or traversing curbs, or other impediments.

WARNING

DO NOT attempt to lift a wheelchair by lifting on any removable (detachable) parts. Lifting by means of any removable (detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair.

Also, be aware of any removable (detachable) parts. These must NEVER be used to move the wheelchair or as lifting supports, as they may be inadvertently released, resulting in possible injury to the user and/or assistant(s).

When learning a new assistance technique, have an experienced assistant help you before attempting it alone.

Reaching, Leaning and Bending - Forward

NOTE: For this procedure, refer to FIGURE 2.2.

Position the front casters so that they are extended as far forward as possible and engage wheel locks.

WARNING

DO NOT attempt to reach objects if you have to move forward in the seat or pick them up from the floor by reaching down between your knees.

Reaching, Leaning, and Bending - Forward

Reaching, Leaning - Backwards

WARNING

DO NOT lean over the top of the back upholstery. This will change your center of gravity and may cause you to tip over.

Reaching, Leaning, and Bending - Backwards

FIGURE 2.2 Reaching, Leaning and Bending

- Forward

Crossfire™Series Wheelchairs

16

Part No 1148078

Image 16
Contents CrossfireSeries Wheelchairs CrossfireSeries Wheelchairs Table of Contents Seat ANTI-TIPPER Special Notes MeaningSeat Positioning Strap Typical Product Parameters TitaniumRear Wheel Camber Tyre Pressure Conversion PSIGeneral Guidelines Stability WarningOperating Information Weight Limitation Weight TrainingTyre Pressure and Information Safe Handling Stability and BalanceCoping with Everyday Obstacles Stability and BalanceReaching, Leaning and Bending Forward Reaching, Leaning BackwardsTipping Tipping CurbsStairways Tipping CurbsTransferring To and From Other Seats Transferring To and From Other SeatsSafety Inspection Checklist Safety InspectionInspect Initially Inspect/Adjust Weekly Inspect/Adjust MonthlyTroubleshooting Inspect/Adjust PeriodicallyMaintenance Safety Precautions MaintenanceSuggested Maintenance Procedures Safety Inspection Adjusting/Replacing Standard Footrest Adjusting the FootrestFootrest Replacing the FootrestInstalling/Adjusting Optional Clamp on Raised Footrest Replacing/Adjusting Optional Adjustable Angle FootrestInstalling AdjustingAdjusting Footplate Angle Adjusting Footplate DepthInstalling the Swingaway Padded Armrest Socket Assembly ArmsAdjusting Swingaway Padded Armrest Height Adjusting Swingaway Padded Armrest HeightBack Back Angle AdjustmentUnfolding/Folding the Back Back Angle Adjustment Adjustable Tension Back Upholstery Adjustable Tension StrapsReplacing Adjustable Tension Back Upholstery Back Upholstery CoverRemoving/Installing Foldover Back Upholstery Installing Foldover Back Upholstery Removing Foldover Back UpholsteryBack Height Adjustment Adjustable Backs Only HOLE* Number Back Height in Inches and CentimetersReplacing Adjustable Tension Seat Upholstery SeatReplacing Adjustable Tension Seat Upholstery Removing/Installing Rear Wheels WheelsAdjusting Quick-Release Axles Replacing Quad-Release AxlesAnd/or Out Adjusting Quad-Release HandlesRemoving Play from Rear Wheels Handrim Replacement Handrim ReplacementRepairing/Replacing Rear Wheel, Tyre/Tube Adjusting Wheelbase Length Adjusting Center of GravityCamber Tube Mounting Bracket Repositioning the Camber Tube Mounting Brackets Repositioning the Camber Tube Mounting Bracket Socket ScrewsReversing the Camber Tube Mounting Bracket Direction Repositioning the Camber Tube Mounting Bracket Socket ScrewsAdjusting Wheelbase Width Reversing the Camber Tube Mounting Bracket DirectionInstalling the Camber Tube Removing/Installing/ the Camber TubeRemoving the Camber Tube Adjusting the Camber Tube Stand behind the wheelchair to determine left or rightDetermining Toe In/Toe Out Adjusting Fork Tension 14 Adjusting Fork TensionStandard Forks Removing/Installing/Repositioning the Caster AssembliesSuspension Forks Removing/Installing the Fork Assembly Removing Fork AssemblyInstalling Fork Assembly 17 Removing/Installing the Fork AssemblyInstalling the Elastomer Removing/Installing the Elastomers Suspension Forks OnlyRemoving the Elastomer Replacing/Adjusting the Wheel Locks Adjusting the Wheel LockWheel Locks Replacing the Wheel LockReplacing/Adjusting the Wheel Locks Changing Wheel Lock Handle PositionConverting From Push-to-Lock to Pull-to-Lock Converting From Pull-to-Lock to Push-to-LockAdjusting Anti-tipper Adjusting/Replacing Anti-tipperANTI-TIPPER Replacing Anti-tipper Part NumberLimited Warranty Switzerland