Invacare T6 manual Stairways, Tipping Curbs

Page 18

SECTION 2—SAFE HANDLING

WARNING

When lowering the front casters of the wheelchair, DO NOT let the wheelchair drop the last few inches to the ground. This could result in injury to the occupant and/or damage to the wheelchair.

Roll the wheelchair backward and slowly lower the wheelchair in one continuous movement. DO NOT let the wheelchair drop the last few inches to the ground. This could result in injury to the occupant. Turn the anti-tippers so the wheels are facing down.

FIGURE 2.3 Tipping - Curbs

Stairways

WARNING

Concerning stairway access: Invacare does not recommend that wheelchairs be transported up or down stairways with occupant in the wheelchair. Possible injury to occupant and/or assistant(s) can occur. Transfer to an everyday use wheelchair is recommended.

DO NOT attempt to lift the wheelchair by any removable (detachable) parts. Lifting by means of any removable (detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair.

Extreme caution is advised when it is necessary to move an occupied wheelchair up or down a stairway. Invacare recommends that, if possible, the user be removed from the wheelchair prior to moving. Invacare recommends using two assistants and making thorough preparations. Make sure to use only secure, non-detachable parts for hand-held supports.

Follow this procedure for moving the wheelchair between floors when an elevator is NOT available:

1.If equipped, turn the anti-tippers up. Refer to Footrest on page 25.

2.After the wheelchair has been tilted back to the balance point, one assistant (in the rear) backs the wheelchair up against the first step, while securely grasping a non-removable (non-detachable) part of the wheelchair for leverage.

3.The second assistant, with a firm hold on a non-detachable part of the framework, lifts the wheelchair up and over the stair and steadies it as the first assistant places one foot on the next stair and repeats procedure.

4.The wheelchair should not be lowered until the last stair has been negotiated and it has been rolled away from the stairway.

Crossfire™Series Wheelchairs

18

Part No 1148078

Image 18
Contents CrossfireSeries Wheelchairs CrossfireSeries Wheelchairs Table of Contents Seat ANTI-TIPPER Special Notes MeaningSeat Positioning Strap Typical Product Parameters TitaniumRear Wheel Camber Tyre Pressure Conversion PSIGeneral Guidelines Stability WarningOperating Information Weight Training Weight LimitationTyre Pressure and Information Safe Handling Stability and BalanceCoping with Everyday Obstacles Stability and BalanceReaching, Leaning and Bending Forward Reaching, Leaning BackwardsTipping Tipping CurbsStairways Tipping CurbsTransferring To and From Other Seats Transferring To and From Other SeatsSafety Inspection Safety Inspection ChecklistInspect Initially Inspect/Adjust Weekly Inspect/Adjust MonthlyTroubleshooting Inspect/Adjust PeriodicallyMaintenance Maintenance Safety PrecautionsSuggested Maintenance Procedures Safety Inspection Footrest Adjusting/Replacing Standard FootrestAdjusting the Footrest Replacing the FootrestInstalling Installing/Adjusting Optional Clamp on Raised FootrestReplacing/Adjusting Optional Adjustable Angle Footrest AdjustingAdjusting Footplate Angle Adjusting Footplate DepthInstalling the Swingaway Padded Armrest Socket Assembly ArmsAdjusting Swingaway Padded Armrest Height Adjusting Swingaway Padded Armrest HeightBack Angle Adjustment BackUnfolding/Folding the Back Back Angle Adjustment Replacing Adjustable Tension Back Upholstery Adjustable Tension Back UpholsteryAdjustable Tension Straps Back Upholstery CoverRemoving/Installing Foldover Back Upholstery Installing Foldover Back Upholstery Removing Foldover Back UpholsteryBack Height Adjustment Adjustable Backs Only HOLE* Number Back Height in Inches and CentimetersReplacing Adjustable Tension Seat Upholstery SeatReplacing Adjustable Tension Seat Upholstery Removing/Installing Rear Wheels WheelsAdjusting Quick-Release Axles Replacing Quad-Release AxlesAdjusting Quad-Release Handles And/or OutRemoving Play from Rear Wheels Handrim Replacement Handrim ReplacementRepairing/Replacing Rear Wheel, Tyre/Tube Adjusting Wheelbase Length Adjusting Center of GravityCamber Tube Mounting Bracket Repositioning the Camber Tube Mounting Brackets Repositioning the Camber Tube Mounting Bracket Socket ScrewsReversing the Camber Tube Mounting Bracket Direction Repositioning the Camber Tube Mounting Bracket Socket ScrewsAdjusting Wheelbase Width Reversing the Camber Tube Mounting Bracket DirectionRemoving/Installing/ the Camber Tube Installing the Camber TubeRemoving the Camber Tube Adjusting the Camber Tube Stand behind the wheelchair to determine left or rightDetermining Toe In/Toe Out Adjusting Fork Tension 14 Adjusting Fork TensionRemoving/Installing/Repositioning the Caster Assemblies Standard ForksSuspension Forks Removing/Installing the Fork Assembly Removing Fork AssemblyInstalling Fork Assembly 17 Removing/Installing the Fork AssemblyRemoving/Installing the Elastomers Suspension Forks Only Installing the ElastomerRemoving the Elastomer Wheel Locks Replacing/Adjusting the Wheel LocksAdjusting the Wheel Lock Replacing the Wheel LockReplacing/Adjusting the Wheel Locks Changing Wheel Lock Handle PositionConverting From Push-to-Lock to Pull-to-Lock Converting From Pull-to-Lock to Push-to-LockAdjusting/Replacing Anti-tipper Adjusting Anti-tipperANTI-TIPPER Replacing Anti-tipper Part NumberLimited Warranty Switzerland