Invacare T6 manual Removing/Installing/ the Camber Tube, Removing the Camber Tube

Page 47

SECTION 8—WHEELS

Removing/Installing/ the Camber Tube

WARNING

Camber tube mounting clamps - Make sure the mounting screws are securely tightened before using the wheelchair, otherwise personal injury or damage to the wheelchair may occur.

NOTE: For this procedure, refer to FIGURE 8.11.

NOTE: When replacing or changing the camber tube, perform with the new camber tube.

Removing the Camber Tube

1.Remove the rear wheels. Refer to Removing/Installing Rear Wheels on page 38.

2.Loosen the two socket screws securing camber tube to the two camber tube mounting brackets.

3.Slide the camber tube from the camber tube mounting brackets.

Installing the Camber Tube

1.Insert the camber tube into the camber tube mounting brackets.

2.Center the camber tube in the camber tube mounting brackets.

3.Loosen the two socket screws securing camber tube to the two camber tube mounting brackets.

4.Adjust the camber tube. Refer to Adjusting the Camber Tube on page 48.

Socket Screw

Socket Screw

Camber

Tube

Camber Tube

Mounting Bracket

FIGURE 8.11 Adjusting Wheelbase Length (Adjusting Center of Gravity)

Part No 1148078

47

Crossfire™Series Wheelchairs

Image 47

Contents CrossfireSeries Wheelchairs CrossfireSeries Wheelchairs Table of Contents Seat ANTI-TIPPER Meaning Special NotesSeat Positioning Strap Titanium Typical Product ParametersRear Wheel Camber PSI Tyre Pressure ConversionStability Warning General GuidelinesOperating Information Tyre Pressure and Information Weight TrainingWeight Limitation Stability and Balance Safe HandlingStability and Balance Coping with Everyday ObstaclesReaching, Leaning Backwards Reaching, Leaning and Bending ForwardTipping Curbs TippingTipping Curbs StairwaysTransferring To and From Other Seats Transferring To and From Other SeatsInspect Initially Safety InspectionSafety Inspection Checklist Inspect/Adjust Monthly Inspect/Adjust WeeklyInspect/Adjust Periodically TroubleshootingSuggested Maintenance Procedures MaintenanceMaintenance Safety Precautions Safety Inspection Replacing the Footrest Adjusting/Replacing Standard FootrestAdjusting the Footrest FootrestAdjusting Installing/Adjusting Optional Clamp on Raised FootrestReplacing/Adjusting Optional Adjustable Angle Footrest InstallingAdjusting Footplate Depth Adjusting Footplate AngleArms Installing the Swingaway Padded Armrest Socket AssemblyAdjusting Swingaway Padded Armrest Height Adjusting Swingaway Padded Armrest HeightUnfolding/Folding the Back Back Angle AdjustmentBack Back Angle Adjustment Back Upholstery Cover Adjustable Tension Back UpholsteryAdjustable Tension Straps Replacing Adjustable Tension Back UpholsteryRemoving/Installing Foldover Back Upholstery Removing Foldover Back Upholstery Installing Foldover Back UpholsteryHOLE* Number Back Height in Inches and Centimeters Back Height Adjustment Adjustable Backs OnlySeat Replacing Adjustable Tension Seat UpholsteryReplacing Adjustable Tension Seat Upholstery Wheels Removing/Installing Rear WheelsReplacing Quad-Release Axles Adjusting Quick-Release AxlesRemoving Play from Rear Wheels Adjusting Quad-Release HandlesAnd/or Out Handrim Replacement Handrim ReplacementAdjusting Wheelbase Length Adjusting Center of Gravity Repairing/Replacing Rear Wheel, Tyre/TubeCamber Tube Mounting Bracket Repositioning the Camber Tube Mounting Bracket Socket Screws Repositioning the Camber Tube Mounting BracketsRepositioning the Camber Tube Mounting Bracket Socket Screws Reversing the Camber Tube Mounting Bracket DirectionReversing the Camber Tube Mounting Bracket Direction Adjusting Wheelbase WidthRemoving the Camber Tube Removing/Installing/ the Camber TubeInstalling the Camber Tube Stand behind the wheelchair to determine left or right Adjusting the Camber TubeDetermining Toe In/Toe Out 14 Adjusting Fork Tension Adjusting Fork TensionSuspension Forks Removing/Installing/Repositioning the Caster AssembliesStandard Forks Removing Fork Assembly Removing/Installing the Fork Assembly17 Removing/Installing the Fork Assembly Installing Fork AssemblyRemoving the Elastomer Removing/Installing the Elastomers Suspension Forks OnlyInstalling the Elastomer Replacing the Wheel Lock Replacing/Adjusting the Wheel LocksAdjusting the Wheel Lock Wheel LocksChanging Wheel Lock Handle Position Replacing/Adjusting the Wheel LocksConverting From Pull-to-Lock to Push-to-Lock Converting From Push-to-Lock to Pull-to-LockANTI-TIPPER Adjusting/Replacing Anti-tipperAdjusting Anti-tipper Part Number Replacing Anti-tipperSwitzerland Limited Warranty