SECTION
Adjusting Footplate Angle
1.Loosen, but DO NOT remove the two mounting screws and locknuts (not shown) that secure the footplate to the two footrest tubes.
2.Position the footplate to the necessary angle to accommodate the user.
3.Retighten the two mounting screws and locknuts.
NOTE: The locknuts should lie in the channel of the footplate clamp.
Adjusting Footplate Depth
1.Remove the two mounting screws and locknuts (not shown) that secure footplate to the footrest tubes.
NOTE: Observe the angle of footplate for reinstallation.
2.Move the footplate to one of two mounting positions to accommodate the user.
3.Using the two mounting screws and locknuts, secure the footplate to the footrest tubes.
NOTE: The locknuts should lie in the channel of the footplate half clamp.
| Mounting | Clamp |
Wheelchair | Positions | (Allen |
Frame |
| Screw) |
Clamp |
|
|
(Allen Screw) |
|
|
|
| Mounting |
|
| Screws |
| Footrest | Locknut |
| Tube | (Not Shown) |
|
| Footplate |
Adjustments Depth
Angle
Height
FIGURE 4.3 Replacing/Adjusting Optional Adjustable Angle Footrest
Part No 1148078 | 27 | Crossfire™Series Wheelchairs |