Invacare T6 manual Operating Information

Page 12

SECTION 1—GENERAL GUIDELINES

Operating Information

To determine and establish your particular safety limits, practice bending, reaching and transferring activities in several combinations in the presence of a qualified healthcare professional before attempting active use of the wheelchair.

DO NOT attempt to reach objects if you have to move forward in the seat.

DO NOT attempt to reach objects if you have to pick them up from the floor by reaching down between your knees.

DO NOT lean over the top of the back upholstery to reach objects from behind as this may cause the wheelchair to tip over.

DO NOT shift your weight or sitting position toward the direction you are reaching as the wheelchair may tip over.

DO NOT tip the wheelchair without assistance.

DO NOT attempt to stop a moving wheelchair with wheel locks. Wheel locks are not brakes.

NEVER leave an unoccupied wheelchair on an incline.

DO NOT use an escalator to move a wheelchair between floors. Serious bodily injury may occur. Before attempting to transfer in or out of the wheelchair, every precaution should be taken to reduce the gap distance. Turn both casters parallel to the object you are transferring onto. Also be certain the wheel locks are engaged to prevent the wheels from moving.

DO NOT operate on roads, streets or highways.

DO NOT climb, go up or down ramps or traverse slopes greater than 9°.

DO NOT attempt to move up or down an incline with a water, ice or oil film.

DO NOT attempt to ride over curbs or obstacles. Doing so may cause your wheelchair to turn over and cause bodily harm or damage to the wheelchair.

Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.

Because TOP END wheelchairs are made to the specifications of the original owners it is unlikely that refurbished product would be suitable to other user’s needs.

DO NOT attempt to lift the wheelchair by any removable (detachable) parts. Lifting by means of any removable (detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair.

DO NOT stand on the frame of the wheelchair.

Check all Allen screws that secure the footrest/raised footrest system to the wheelchair frame before using the wheelchair, especially if engaging in any contact sport.

Anti-tippers MUST be used at all times. When outdoors on wet, soft ground or on gravel surfaces, anti-tippers may not provide the same level of protection against tip over. Extra caution MUST be observed when traversing such surfaces. Inasmuch as the anti-tippers are an option on this wheelchair (you may order with or without the anti-tippers), Invacare strongly recommends ordering the anti-tippers as an additional safeguard for the wheelchair user.

Crossfire™Series Wheelchairs

12

Part No 1148078

Image 12
Contents CrossfireSeries Wheelchairs CrossfireSeries Wheelchairs Table of Contents Seat ANTI-TIPPER Special Notes MeaningSeat Positioning Strap Typical Product Parameters TitaniumRear Wheel Camber Tyre Pressure Conversion PSIGeneral Guidelines Stability WarningOperating Information Weight Training Weight LimitationTyre Pressure and Information Safe Handling Stability and BalanceCoping with Everyday Obstacles Stability and BalanceReaching, Leaning and Bending Forward Reaching, Leaning BackwardsTipping Tipping CurbsStairways Tipping CurbsTransferring To and From Other Seats Transferring To and From Other SeatsSafety Inspection Safety Inspection ChecklistInspect Initially Inspect/Adjust Weekly Inspect/Adjust MonthlyTroubleshooting Inspect/Adjust PeriodicallyMaintenance Maintenance Safety PrecautionsSuggested Maintenance Procedures Safety Inspection Adjusting/Replacing Standard Footrest Adjusting the FootrestFootrest Replacing the FootrestInstalling/Adjusting Optional Clamp on Raised Footrest Replacing/Adjusting Optional Adjustable Angle FootrestInstalling AdjustingAdjusting Footplate Angle Adjusting Footplate DepthInstalling the Swingaway Padded Armrest Socket Assembly ArmsAdjusting Swingaway Padded Armrest Height Adjusting Swingaway Padded Armrest HeightBack Angle Adjustment BackUnfolding/Folding the Back Back Angle Adjustment Adjustable Tension Back Upholstery Adjustable Tension StrapsReplacing Adjustable Tension Back Upholstery Back Upholstery CoverRemoving/Installing Foldover Back Upholstery Installing Foldover Back Upholstery Removing Foldover Back UpholsteryBack Height Adjustment Adjustable Backs Only HOLE* Number Back Height in Inches and CentimetersReplacing Adjustable Tension Seat Upholstery SeatReplacing Adjustable Tension Seat Upholstery Removing/Installing Rear Wheels WheelsAdjusting Quick-Release Axles Replacing Quad-Release AxlesAdjusting Quad-Release Handles And/or OutRemoving Play from Rear Wheels Handrim Replacement Handrim ReplacementRepairing/Replacing Rear Wheel, Tyre/Tube Adjusting Wheelbase Length Adjusting Center of GravityCamber Tube Mounting Bracket Repositioning the Camber Tube Mounting Brackets Repositioning the Camber Tube Mounting Bracket Socket ScrewsReversing the Camber Tube Mounting Bracket Direction Repositioning the Camber Tube Mounting Bracket Socket ScrewsAdjusting Wheelbase Width Reversing the Camber Tube Mounting Bracket DirectionRemoving/Installing/ the Camber Tube Installing the Camber TubeRemoving the Camber Tube Adjusting the Camber Tube Stand behind the wheelchair to determine left or rightDetermining Toe In/Toe Out Adjusting Fork Tension 14 Adjusting Fork TensionRemoving/Installing/Repositioning the Caster Assemblies Standard ForksSuspension Forks Removing/Installing the Fork Assembly Removing Fork AssemblyInstalling Fork Assembly 17 Removing/Installing the Fork AssemblyRemoving/Installing the Elastomers Suspension Forks Only Installing the ElastomerRemoving the Elastomer Replacing/Adjusting the Wheel Locks Adjusting the Wheel LockWheel Locks Replacing the Wheel LockReplacing/Adjusting the Wheel Locks Changing Wheel Lock Handle PositionConverting From Push-to-Lock to Pull-to-Lock Converting From Pull-to-Lock to Push-to-LockAdjusting/Replacing Anti-tipper Adjusting Anti-tipperANTI-TIPPER Replacing Anti-tipper Part NumberLimited Warranty Switzerland