Invacare T6 manual Troubleshooting, Inspect/Adjust Periodically

SECTION 3—SAFETY INSPECTION

❑Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.

❑Ensure wheel bearings are clean and free of moisture.

❑Ensure casters are free of debris.

❑Check that all labels are present and legible. Replace if necessary.

Inspect/Adjust Periodically

❑Ensure wheelchair rolls straight (no excessive drag/pull to one side).

❑Ensure wheel locks are easy to engage.

❑Ensure that the casters are free of debris.

❑Inspect seat and back upholstery for rips or sagging.

❑Ensure camber bar mounting clamps are securely tightened.

❑Ensure no excessive side movement or binding when lifted and spun.

❑Inspect handrims for signs of rough edges or peeling.

❑Clean upholstery and armrests.

❑Ensure wheel bearings are clean and free of moisture.

❑Ensure casters are free of debris.

❑Check that all labels are present and legible. Replace if necessary.

Troubleshooting

VEERSCHAIRRIGHT	VEERSCHAIRLEFT	SLUGGISHTURN OR PERFORMANCE	FLUTTERSCASTER	SQUEAKSAND RATTLES	LOOSENESSIN CHAIR	SOLUTIONS
X	X	X	X			Check tyres for correct and equal pressure.
		X	X	X	X	Check for loose stem nuts.
				X	X	Check spokes and nipples.
X	X		X			Check that both casters contact the ground at
						the same time.

Crossfire™Series Wheelchairs 22 Part No 1148078