SECTION
❑Inspect spokes for bent or broken spokes.
❑Ensure all spokes are uniformly tight.
❑Clean upholstery and armrests.
❑Inspect wheel/fork assembly for proper tension by spinning caster; caster should come to a gradual stop.
❑Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑Ensure wheel bearings are clean and free of moisture.
❑Inspect tyres for flat spots and wear.
❑If pneumatic tyres check for proper inflation.
❑Ensure casters are free of debris.
❑Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Weekly
❑Ensure wheel locks are easy to engage and prevent the wheels from moving.
❑Ensure that the casters are free of debris.
❑Ensure hand grips (if equipped) are not loose.
❑Ensure quick release axles and camber inserts are clean.
❑Ensure quick/quad release axles lock properly.
❑Inspect handrims for signs of rough edges or peeling.
❑Inspect spokes for bent or broken spokes.
❑Ensure All spokes uniformly tight.
❑Inspect wheel/fork assembly for proper tension by spinning caster; caster should come to a gradual stop.
❑Inspect tyres for flat spots and wear.
❑If pneumatic tyres check for proper inflation.
❑Ensure casters are free of debris.
Inspect/Adjust Monthly
❑Ensure wheel locks DO NOT interfere with tyres when rolling.
❑Ensure that the casters are free of debris.
❑Ensure pivot points are free of wear and looseness.
❑Inspect upholstery fastening flaps to ensure they securely latch.
❑Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑Ensure camber bar mounting clamps are securely tightened.
Part No 1148078 | 21 | Crossfire™Series Wheelchairs |