Invacare T6 manual Transferring To and From Other Seats

Page 19

SECTION 2—SAFE HANDLING

5. If equipped, turn the anti-tippers down. Refer to Footrest on page 25 in this manual.

WARNING

DO NOT use an escalator to move a wheelchair between floors. Serious bodily injury may occur.

Transferring To and From Other Seats

WARNING

BEFORE attempting to transfer in or out of the wheelchair, every precaution should be taken to reduce the gap distance. Turn both casters parallel to the object you are transferring onto. Also be certain the wheel locks are engaged to help prevent the wheels from moving.

When transferring, position yourself as far back as possible in the seat. This will prevent damaged upholstery and the possibility of the wheelchair tipping forward.

NOTE: For this procedure, refer to FIGURE 2.4.

NOTE: This activity may be performed independently provided you have adequate mobility and upper body strength.

Position the wheelchair as close as possible along side the seat to which you are transferring, with the front casters parallel to it. Remove the armrest, if installed. Engage wheel locks. Shift body weight into seat with transfer.

During independent transfer, little or no seat platform will be beneath you. Use a transfer board if at all possible.

FIGURE 2.4 Transferring To and From Other Seats

Part No 1148078

19

Crossfire™Series Wheelchairs

Image 19
Contents CrossfireSeries Wheelchairs CrossfireSeries Wheelchairs Table of Contents Seat ANTI-TIPPER Meaning Special NotesSeat Positioning Strap Titanium Typical Product ParametersRear Wheel Camber PSI Tyre Pressure ConversionStability Warning General GuidelinesOperating Information Weight Limitation Weight TrainingTyre Pressure and Information Stability and Balance Safe HandlingStability and Balance Coping with Everyday ObstaclesReaching, Leaning Backwards Reaching, Leaning and Bending ForwardTipping Curbs TippingTipping Curbs StairwaysTransferring To and From Other Seats Transferring To and From Other SeatsSafety Inspection Checklist Safety InspectionInspect Initially Inspect/Adjust Monthly Inspect/Adjust WeeklyInspect/Adjust Periodically TroubleshootingMaintenance Safety Precautions MaintenanceSuggested Maintenance Procedures Safety Inspection Replacing the Footrest Adjusting/Replacing Standard FootrestAdjusting the Footrest FootrestAdjusting Installing/Adjusting Optional Clamp on Raised FootrestReplacing/Adjusting Optional Adjustable Angle Footrest InstallingAdjusting Footplate Depth Adjusting Footplate AngleArms Installing the Swingaway Padded Armrest Socket AssemblyAdjusting Swingaway Padded Armrest Height Adjusting Swingaway Padded Armrest HeightBack Back Angle AdjustmentUnfolding/Folding the Back Back Angle Adjustment Back Upholstery Cover Adjustable Tension Back UpholsteryAdjustable Tension Straps Replacing Adjustable Tension Back UpholsteryRemoving/Installing Foldover Back Upholstery Removing Foldover Back Upholstery Installing Foldover Back UpholsteryHOLE* Number Back Height in Inches and Centimeters Back Height Adjustment Adjustable Backs OnlySeat Replacing Adjustable Tension Seat UpholsteryReplacing Adjustable Tension Seat Upholstery Wheels Removing/Installing Rear WheelsReplacing Quad-Release Axles Adjusting Quick-Release AxlesAnd/or Out Adjusting Quad-Release HandlesRemoving Play from Rear Wheels Handrim Replacement Handrim ReplacementAdjusting Wheelbase Length Adjusting Center of Gravity Repairing/Replacing Rear Wheel, Tyre/TubeCamber Tube Mounting Bracket Repositioning the Camber Tube Mounting Bracket Socket Screws Repositioning the Camber Tube Mounting BracketsRepositioning the Camber Tube Mounting Bracket Socket Screws Reversing the Camber Tube Mounting Bracket DirectionReversing the Camber Tube Mounting Bracket Direction Adjusting Wheelbase WidthInstalling the Camber Tube Removing/Installing/ the Camber TubeRemoving the Camber Tube Stand behind the wheelchair to determine left or right Adjusting the Camber TubeDetermining Toe In/Toe Out 14 Adjusting Fork Tension Adjusting Fork TensionStandard Forks Removing/Installing/Repositioning the Caster AssembliesSuspension Forks Removing Fork Assembly Removing/Installing the Fork Assembly17 Removing/Installing the Fork Assembly Installing Fork AssemblyInstalling the Elastomer Removing/Installing the Elastomers Suspension Forks OnlyRemoving the Elastomer Replacing the Wheel Lock Replacing/Adjusting the Wheel LocksAdjusting the Wheel Lock Wheel LocksChanging Wheel Lock Handle Position Replacing/Adjusting the Wheel LocksConverting From Pull-to-Lock to Push-to-Lock Converting From Push-to-Lock to Pull-to-LockAdjusting Anti-tipper Adjusting/Replacing Anti-tipperANTI-TIPPER Part Number Replacing Anti-tipperSwitzerland Limited Warranty