
5360 IP Phone – User Guide
Direct Paging - Handsfree Answerback Disabled
Your administrator enables or disables Handsfree Answerback and you can also turn it on or off on your phone. To turn Handsfree Answerback off, see Direct Paging - Handsfree Answerback Enabled. When Handsfree Answerback is disabled on your phone and you receive a Direct Page, the Direct Page is indicated by a single burst of tone.
To answer Direct Page calls when Handsfree Answerback is disabled:
Phone state before Page |
| To answer the Direct Page |
arrives: |
| (indicated by single burst of tone): |
|
|
|
Phone is idle and MUTE is OFF. | 1. | Check that MUTE is ON solid. |
| 2. | Lift the handset OR press the MUTE key to answer in |
|
| Handsfree mode. (The light turns OFF.) |
| 3. | Begin speaking. |
You are on a handset call or | 1. | Check that MUTE is flashing. |
headset call, and MUTE is OFF | 2. | Press MUTE. The light turns ON solid and you are now |
|
| speaking to the paging party and have MUTED your |
|
| handset/headset call. |
| 3. | Speak to the paging party. Press MUTE to alternate |
|
| between handset and handsfree calls. |
You are on a MUTED handset/headset | The party paging you receives a busy tone. Handsfree | |
call, OR, you are on a Handsfree call | Answerback does not interrupt your call. | |
|
|
|
To end a Direct Page call, do one of the following:
Hang up the handset to end a handset call.
Press (SPEAKER) to end a Handsfree call.
Press (CANCEL).
When the Handsfree Direct Page call ends, the (MUTE) key light returns to the state it was in before the call was established.
- 52 -