5360 IP Phone – User Guide
Programming Float Keys
You program the keys to appear on Float Keys using the Settings application on the 5360 phone. Float Keys act essentially as a mirror of any of the lines programmed on the 48 programmable keys and which are programmed to float. The Float Keys reflect the state of those lines including indicators and labels, and allows you to access those lines without having to navigate to the pages where those keys may be displayed. Any answered floating line remains floating for the duration of the call, regardless of the manner in which it was answered.
To enable float keys:
1.Press the blue Applications key 
.
2.Press Settings.
3.Press Float Keys.
4.Press Enable, and then press Save.
To program Float Keys using the Settings Application:
1.Press the blue Applications key 
.
2.Press Settings.
3.Press Programmable Keys.
4.Press one of the line keys that you want to appear on a Float Key. Use the Page Navigator keys to move through the pages of programmed keys if necessary. The Float Configuration display appears.
5.Press a button corresponding to your desired float configuration:
Float Immediate – configure the unanswered incoming call on the designated line to appear at the Float Key immediately
Float after. . . – configure unanswered incoming calls to display on a Float Key after a delay of up to 60 seconds
Do Not Float – configure unanswered incoming calls to never display on a Float Key (this is the default setting)
6.Press Save.
7.Repeat steps 4 – 6 for every line key that you want to appear on the float keys.
8.Press Close.
To disable float keys
1.Press the blue Applications key 
.
2.Press Settings.
3.Press Float Keys.
4.Press checkbox for Enable to disable Float Keys.
5.Press Save.
- 56 -