Clarity C4230HS manual Phone Will Not Hold Charge, Difficulty in Placing or Receiving Calls

TROUBLESHOOTING

Phone Will Not Hold Charge:

•Make sure the charging contacts on the handset and base are free of dust and dirt. While unplugged, clean the contacts with a soft cloth.

•Make sure CHARGE LED on the base is lit when the handset is in the cradle.

•Handset battery may have developed a memory, due to user improperly charging, and may need to be replaced. (Battery must be charged a full 12 hours before the first use.)

Difficulty in Placing or Receiving Calls:

•Move closer to the base and try again.

•Make sure you have selected the correct dialing mode, tone or pulse.

•Make sure the AC Adapter is not plugged into a wall outlet with other appliances. Disconnect for 5-10 seconds then reconnect. Place the handset back on the base and reinsert the AC Adapter.

•Make sure the handset battery is fully charged.

Your handset screen is showing Out of Range

•Move closer to the base.

•To register the C4230HS, place the C4230HS handset into the main unit until the screen displays: Handset Registered. It will take approximately 5-10 seconds for the handset to register to the base.

•Handset may need to be re-registered to the base manually. First, select INITIAL SETUP on the main menu. Second, select REGISTRATION on the sub-menu.The screen will then display “Please hold the page button until beep.” This will register your handset to the base.The screen will then display the handset number.

11