TROUBLESHOOTING GUIDE (CONTINUED)
Problem | Solution |
Range is shorter | • Press the CHAN button during the conversation to select a |
than normal | new channel. |
| • Position the base antenna upward. |
|
|
Battery will not hold a | • Be sure you are sufficiently charging the battery. When the |
charge OR is fully charged | battery has been charged for 12 hours, you can expect |
and the BAT LOW lights | approximately 4 hours of talk time. |
| • Check to be sure battery contacts on both the handset and |
| the base are making contact and are clean; free of dirt or lint. |
| • When the handset is placed in the base, check that the base |
| CHARGE indicator is on. |
|
|
BAT LOW indicator stays on | • Charge battery for 12 hours. |
|
|
Memory Dialing | • Did you program the memory location keys correctly? |
doesn’t work |
|
| • Did you follow proper dialing sequence? |
| • Make sureT/P switch is correctly set. |
|
|
Unit locks up | • If the phone still does not work, disconnect the power cord |
no link between | and remove the battery pack.Then reconnect the power cord |
the base and | and reinstall the battery pack. Place handset in the base for |
the handset | 20 seconds to allow it to reinitialize. |
| • If a power outage occurs while the handset is away from the |
| base, the handset must be returned to the base when the |
| power returns. |
|
|
26