EACH LINE ON A SEPARATE MODULAR JACK | 1 |
1.Remove the handset hook; turn it upside down, and put it back in the slot. You need to do this so the handset doesn’t fall out of the base.
2. Reverse the direction of the mounting | LINE 2 |
| LINE 1 |
bracket and replace it by putting the | CHARGE |
| PAGE |
tabs into the slots on the top of the unit | PAGE |
| |
first, and then by snapping the bottom |
|
tabs into place. | 3 |
3. Plug the telephone line cord into the |
|
jack marked L1 OR L2 on the back of the |
|
unit and plug the other end into a |
|
modular wall jack. |
|
4. Plug the remaining telephone line cord | 2 |
into the L2 jack on the back of the unit |
|
and into a modular wall jack. |
|
5.Connect the power supply adapter to the POWER 9V DC jack on the back of
the unit, and then thread it through the | 4 |
bottom of base.
(Installation continued on next page.)
5
CAUTION: Use only the ATLINKS USA power supply 5- 2445(white)/
11