WALL MOUNT INSTALLATION | 1 |
TWO LINES ON A SINGLE MODULAR JACK
1.Remove the handset hook; turn it upside down, and put it back in the slot. You need to do this so the handset doesn’t fall out of the base.
2.Plug the gray telephone line cord into the jack marked L1 OR L2 on the back of the unit and plug the other end into
a
3.Reverse the direction of the mounting bracket and replace it by putting the
tabs into the slots on the top of the | 3 |
unit first and snapping the bottom tabs into place.
LINE 1
LINE 2
CHARGE
PAGE
PAGE
2
4. Connect the power supply adapter to | 4 | |
the POWER 9V DC jack on the back of | ||
5 | ||
the unit.Then thread it through the | ||
| ||
bottom of base. |
|
5. Slip the mounting holes over the wall
plate posts and slide the unit down firmly into place. (Wall plate not included.)
(Installation continued on next page.)
CAUTION: Use only the ATLINKS USA power supply 5-
9