6 Replace the handset.
NOTE: When you enter a new number previous numbers are auto- matically deleted.
Press the Redial button if you need to insert a pause in the telephone number.
Dialing using One-touch Memory Buttons
1.Lift the handset and wait for a dial tone.
2.Press either
FCC WANTS YOU TO KNOW
Your new product has been registered with the Federal Communication Commission (FCC). This product complies with standards in Part 68 of the FCC Rules. The FCC requires us to provide you with the following information:
Connection and Use with the Nationwide
Telephone Network
The FCC requires that you connect your product to the nationwide telephone network through a modular telephone outlet or jack. The modular telephone outlet or jack to which the telephone must be connected is a USOC
Notification to the Telephone Company
The FCC requires that upon request of your local telephone company, you provide the following information: a) The “line” to which you will connect the telephone equipment (that is, your phone number), and b) The telephone equipment’s FCC registration number and ringer equivalence number (REN). These numbers are on the back or bottom of your telephone equipment. The REN is used to determine how many devices you may connect to your telephone line and still have them ring when your telephone line is called. In most, but not all areas, the sum of all REN’s should be 5 or less. You may want to contact your local telephone company.
Repair Instructions
If it is determined that your telephone equipment is malfunctioning, the FCC requires that it not be used and that it be unplugged from the modular outlet until the problem has been corrected. Repairs to the telephone equipment can only be made by the manufacturer or its authorized agents or by others who may be authorized by the FCC. For repair procedures, follow instruction outlined under the “Limited Warranty”.
Rights of the Telephone Company
7 – ENGLISH