GE 55909320 manual Answering System Indicator, Screening Calls from the Handset

1.Press the format/answerer button.

2.Press the 2 key (play/stop).

3.When you are finished listening to your messages, press format/ answerer again to quit, or you may listen to the voice menu at any time by pressing 7.

ANSWERING SYSTEM INDICATOR

The answering system is active when the answerer indicator is illuminated.

SCREENING CALLS FROM THE HANDSET

You may use the cordless handset to remotely screen calls.

1.Make sure the phone stops ringing and the answering system answers the call.

2.Press the handset answerer/format button to gain access to the answering system.

3.Listen to the caller leaving a message.

4.Press the TALK/callback button to speak to the caller, or press the answer/format button to stop screening the call.

MEMORY FULL

When the answering system’s memory is full, the system answers after 10 rings, beeps, and waits for you to enter the 3-digit security code. You have 10 seconds to enter the security code before the phone hangs up.

You should erase some of the messages in order for the system to record incoming messages.

NOTE: The unit also answers after the 10th ring if it is turned off. To access the answering system, enter your 3-digit security code after you hear the beep.

ACCESSING THE ANSWERING SYSTEM FROM ANOTHER LOCATION

You can access your answering system from any touch-tone phone by entering your 3-digit security code after you hear the outgoing announcement.

1. Dial the phone number the answering system is connected to.

37