Unit locks up and no communication between the base and cordless handset
•Unplug the AC power supply from the wall outlet and the back of the base. Remove the handset battery. Wait for 30 seconds and plug the power supply back into the base and wall outlet. Reconnect the battery and charge for 12 hours.
CALLER ID SOLUTIONS
No Display
•Is battery fully charged? Try replacing the battery.
•Make sure that the unit is connected to a
Caller ID Error Message
•The unit displays this message if it detects anything other than valid Caller ID information during the silent period after the first ring. This message indicates the presence of noise on the line.
No Caller ID
•In order to receive Caller ID information, you must subscribe to the standard name/number Caller ID service from your local telephone company.
BATTERY SOLUTIONS
If you experience any of the following problems, even after fully recharging the battery, you may need to replace the battery pack:
•Short talk time
•Poor sound quality
•Limited range
44