GE 55909320 manual Display Contrast, Ring to Answer, Using Toll Saver

3.Press flash/program again to store your selection. You will hear a confirmation tone.

DISPLAY CONTRAST

NOTE: This setting may only be made with the base.

1.Press the flash/program button until SET CONTRAST >1 2 3 shows in the display. “1” is the default setting.

SET CONTRAST >1 2 3

2.Press 1, 2 or 3 on the base touch-tone to enter your selection or use the cid/messages ( < or > ) button on the base to scroll to your selection.

3.Press flash/program again to store your selection. You will hear a confirmation tone.

RING TO ANSWER

NOTE: This setting may only be made with the base.

You may set the number of times you want the phone to ring before the answering system answers a call.

1.Press the flash/program button until RING TO ANSWER > 3, 5 TOLL shows in the display. “5” is the default setting.

RING TO ANSWER

3>5 TOLL

2.Press 3 or 5 or use the cid/messages (< or >) to scroll to 3, 5 or TOLL.

3.Press flash/program again to store your selection. You will hear a confirmation tone.

USING TOLL SAVER

Toll Saver can save you the cost of a toll call when accessing your messages from another phone:

12