Siemens Hicom 300 H, Hicom 300 E manual Accessories, OptiPoint key module

Page 94

Labeling, documentation and accessories

Accessories

With the following accessories, you can customize your telephone (not op- tiPoint 500 eco) to suit your own personal needs. The optiPoint adapters are slide-in modules that can be inserted in the option bay on the bottom of the optiPoint.

optiPoint key module:

Add-on unit with16 freely programmable keys. Up to two of these add-on units can be connected to your phone.

optiPoint acoustic adapter:

For connecting a desk microphone, a headset, speakers and a second handset.

For additional signalization of a call, for example, in a loud environment via an additional ringer, or for controlling lighted displays ("do not disturb" on a door, for example).

optiPoint analog adapter:

For connecting an additional analog telephone, fax machine or a PC with a modem.

optiPoint ISDN adapter:

For connecting an ISDN device, such as an ISDN fax machine, a video unit or a PC with an S0 interface.

optiPoint phone adapter:

For connecting a second system telephone. The second system telephone can be called via its own telephone number.

optiPoint recorder adapter:

For connecting an external recorder or a second handset.

Headset:

Headset for users with high call volumes.

Second Handset:

For better acoustic quality in noisy environments.

Add-On Microphone:

For speakerphone in difficult acoustic conditions.

Active Speaker Box:

For better acoustic quality when using speakerphone.

For details on the above-mentioned products, please refer to the da- tasheet for your optiPoint telephone.

94

Image 94
Contents HiPath 4000 Hicom 300 E/300 H CE label About these Operating InstructionsImportant Notes Environmental labelBasic Usage Instructions OptiPoint 500 economy basic/standardPermanently assigned function keys How to use this user guide DisplayUsing a function key How to activate functionsVia the Service Menu DirectlyAdditional multiline and team functions Which functions can be used?Basic and enhanced functions Additional executive/secretary functionsHow to make best use of your tele- phone Basic Usage Instructions How to activate functionsMaking calls Telephone settings Calling several persons simultaneouslyUsing a different telephone Storing numbers, system functionsMaking multiline and team calls Relocating with the telephoneAdvice for users IndexQuick-reference operating instructions appendix Ending a call Answering a call with the handsetAnswering a call via the speaker key speakerphone Ending the callOpen listening Switching to speakerphoneSwitching to the handset To activateAnswering the waiting call Using the call waiting functionActivating/deactivating call waiting Ending the waiting call, resuming the first callAnswering a callback request Using the mailboxRetrieval from mailbox Meaning of the displayDeleting mailbox entries Timed remindersTerminating mailbox retrieval Incoming call on loudspeaker voice calling Activating/deactivating stop voice calling Answering a call on the headsetMalicious call holding Dialing with the handset on-hook Making callsDialing with the handset off-hook Called party is busy or does not answerSuppressing your number on called party’s display Direct call to a colleague via loudspeaker voice callingEntering commands with tone dialing Dtmf suffix dialing Alternating between two calls toggling To switch to the waiting partyMaking a second call consultation Release the second call return to the first callSetting up a conference call System-supported conferenceSetting up a conference from a waiting call Setting up a conferenceSetting up a conference from a consultation call Starting a conference from a single callIf the new user does not answer Expanding the conferenceCalling and adding another user Expanding the conference from a consultation callTransferring the conference Accepting a waiting call and adding it to the confer- enceViewing member information Disconnecting the last member addedDuring the conference Putting the conference on holdExtending the call with prior announcement Using the switchover buttonTransferring a call Extending the call without prior announcementConsultation TogglingGroup call Using a call list missed calls Using saved numbers to make callsViewing the call log Dialing a number from the call log Saved number redialDeleting an entry from the call log Last number redial Dialing with repertory keysDialing with individual speed dialing numbers Dialing with system speed dialing numbersSetting up a project call Making project callsCall duration display Storing a callback request Using the callback functionIf you do not get through Rejecting a callback requestCamping on a colleague’s call Canceling an entry that is displayedEnding Overriding a colleague’s call intrude Adjusting the ringing tone volume Telephone settingsAdjusting the ringing tone pitch Setting the volume of the alerting tone Backlit Display Adjusting the display contrast onlyAdjusting the angle of the display HiPathLocking your telephone Preventing unauthorized dialingEnabling the telephone again Selecting the language for user prompts displaysSelecting a language Storing a repertory dialing number on a key If you made a mistake during inputStoring a caller’s number or a number that has been dialed Storing a number for redialingStoring any number Saving individual speed dialing numbers Saving a function on a keyCancelling a saved reminder Saving timed remindersChecking the telephone Checking its functionalityChecking the assignment of functions to keys Forwarding calls Using call forwardingFixed forwarding Programming/changing a forwarding destination Activating/deactivating fixed forwardingActivating and deactivating with call forwarding key Deactivating fixed forwarding in the idle menuDeleting the destination for fixed forwarding Variable forwarding Selection of a variable forwarding typeDeleting a forwarding destination Programming/changing the forwarding destinationActivating variable forwarding Deactivating variable forwarding Checking forwardingAutomatic call forwarding Activating and deactivating forwarding using switchDeactivating variable forwarding in the idle menu Forwarding calls for a different terminal Press the key. The lamp lights up Confirm Select and confirm Checking/deactivating call forwarding for fax, PC or busy Checking/deactivating call forwarding for another telephoneOr To check Changing call forwarding for another terminal Using a different telephone in the same way as your own Identifying yourself with PIN and dialingDialing after successful identification Entering the PIN for your own HiPath 4000 or HicomCall forwarding follow me after successful identification If you logged on with a PIN Deactivating identification at the other telephoneIdentification with the chip card If you logged on with a chip cardReconnecting the telephone at the new station line Disconnecting the telephone from its present station lineRelocating with the telephone Making multiline and team calls Using line keysPrimary line Activating the preview function PreviewDifferent states of line key lamps Deactivating the preview functionTaking calls in the order offered Taking calls on line keysTaking calls with priority Via the Service Menu With the Ringer Cutoff key configuredActivating/deactivating ringer Dialing with automatic line seizure Dialing with line keysDialing with selectable line seizure Identifying the line used With the Show Used Line key configuredAlternating between different lines Ending a call on a line key With the privacy key configuredPrivacy Allowing overridePreventing override Terminating a connection on a line keyPlacing on hold Holding a call on a line key and picking it up againResuming the call Forwarding calls for lines Picking up a held callWith the call forwarding key Activating fixed call forwarding for a line without storing Cancelling the fixed call forwarding destination Deactivating call forwarding for a lineCourse of a call Picking up a specific team callTelephone in the idle state Ending the waiting call back to the firstTaking a call in a hunt group Having the number of the called station displayedParking the call Automatic parking and resumption of a callManual parking and resumption of a call ParkingCalling a team member directly Picking up a call on holdLamp statuses of direct station selection DSS keys Lamp is not lit the user is not making a call Taking a call for a direct station selection DSS userLamp is lit the user is making a call Making a call to the executive/secretary Making calls in an executive/sec- retary teamCalling executive or secretary’s office Lamp is not lit the secretary is not making a callTaking a call for the executive during a call in progress Taking a call for the executive in the secretary’s officeExtending a call to the executive Lamp is lit the secretary is making a callForwarding calls directly to the executive Taking a call on the executive’s telephoneParking a call at the first telephone Taking calls for other executive/ secretary teamsResuming a call at the second telephone Activating/deactivating call waiting for executive Calling a messenger To activate deputy Using the call signal function To deactivate deputy Labeling, documentation and accessories Labeling Key FieldsAttaching a Station Number Label DocumentationAccessories OptiPoint key moduleUse of computer-aided telephone applications Troubleshooting Advice for usersCare of the telephone Possible cause Dealing with error messages on the displayPossible response Who to contact if a problem occurs Index Individual speed dialing numbers100 43$643360+7330%630-094 HiPath 4000 Hicom 300 E/300 H Page Important functions at a glance Saved number redialSetting up a conference call Maximum Service Menu functions available