Nortel Networks 43W7774 manual Cfg/sys/access/mgmt, Management Networks Configuration

Alteon OS Command Reference

/cfg/sys/access/mgmt

Management Networks Configuration

[Management Networks Menu]

add	- Add mgmt network definition
rem	-	Remove mgmt network definition
cur	-	Display current mgmt network definitions

This menu is used to define IP address ranges which are allowed to access the switch for man- agement purposes.

Table 6-20Management Network Menu Options (/cfg/sys/access/mgmt)

Command Syntax and Usage

add <mgmt network address> <mgmt network mask>

Adds a defined network through which switch access is allowed through Telnet, SNMP, RIP, or the Alteon OS browser-based interface. A range of IP addresses is produced when used with a network mask address. Specify an IP address and mask address in dotted-decimal notation.

Note: If you configure the management network without including the switch interfaces, it will cause the Firewall Load Balancing health checks to fail and will create a “Network Down” state on the network.

rem <mgmt network address> <mgmt network mask>

Removes a defined network, which consists of a management network address and a management network mask address.

cur

Displays the current configuration.

204 „ The Configuration Menu 43W7774, May 2007