Nortel Networks 43W7774 Cfg/sys/ssnmp/snmpv3/taddr, SNMPv3 Target Address Table Configuration

Alteon OS Command Reference

/cfg/sys/ssnmp/snmpv3/taddr

SNMPv3 Target Address Table Configuration

This command is used to configure the target transport entry. The configured entry is stored in the target address table list in the SNMP engine. This table of transport addresses is used in the generation of SNMP messages.

[SNMPv3 snmpTargetAddrTable 1 Menu]

name	- Set target address name
addr	- Set target transport address IP
port	- Set target transport address port
taglist	- Set tag list
pname	- Set targetParams name
del	- Delete targetAddrTable entry
cur	- Display current targetAddrTable configuration

Table 6-16Target Address Table Menu Options (/cfg/sys/ssnmp/snmpv3/taddr)

Command Syntax and Usage

name <32 character name>

Allows you to configure the locally arbitrary, but unique identifier, target address name associated with this entry.

addr <transport address ip>

Allows you to configure a transport address IP that can be used in the generation of SNMP traps.

port <transport address port>

Allows you to configure a transport address port that can be used in the generation of SNMP traps.

taglist <list of tag string, max 255 characters>

Allows you to configure a list of tags that are used to select target addresses for a particular opera- tion.

pname <32 character name>

Defines the name as defined in /cfg/sys/ssnmp/snmpv3/tparam/name on page 200.

del

Deletes the Target Address Table entry.

cur

Displays the current Target Address Table configuration.

43W7774, May 2007 The Configuration Menu „ 199