Nortel Networks 43W7774 manual Saving a switch dump

Alteon OS Command Reference

Saving a switch dump

To save a switch dump to a FTP/TFTP server, follow the steps below. This example assumes you have a FTP/TFTP server at 192.168.10.10.

1.Set the FTP/TFTP server address where the configuration will be saved:

Set agTftpServer.0 “192.168.10.10”

2.Set the name of dump file:

Set agTftpDumpFileName.0 “MyDumpFile.dmp”

3.Initiate the transfer. To save a dump file, enter 5:

Set agTftpAction.0 “5”

4.If you are using an FTP server, enter a username:

Set agTftpUserName.0 “MyName”

5.If you are using an FTP server, enter a password:

Set agTftpPassword.0 “MyPassword”

43W7774, May 2007 Alteon OS SNMP Agent „ 371