Nortel Networks 43W7774 manual IP Trunk Hash Configuration, Cfg/l2/thash/set

Alteon OS Command Reference

/cfg/l2/thash

IP Trunk Hash Configuration

[IP Trunk Hash Menu]

set	-	IP Trunk Hash Settings Menu
cur	-	Display current IP trunk hash configuration

Use the following commands to configure IP trunk hash settings for the GbESM.

Table 6-43IP Trunk Hash Menu Options (/cfg/l2/thash)

Command Syntax and Usage

set

Displays the Trunk Hash Settings menu. To view menu options, see page 236.

cur

Display current trunk hash configuration.

/cfg/l2/thash/set

IP Trunk Hash

[set IP Trunk	Hash Settings Menu]
smac	- Enable/disable smac hash
dmac	- Enable/disable dmac hash
sip	- Enable/disable sip hash
dip	- Enable/disable dip hash
cur	- Display current trunk hash setting

Trunk hash parameters are set globally for the GbE Switch Module. You can enable one or two parameters, to configure any of the following valid combinations:

„SMAC (source MAC only)

„DMAC (destination MAC only)

„SIP (source IP only)

„DIP (destination IP only)

„SIP + DIP (source IP and destination IP)

„SMAC + DMAC (source MAC and destination MAC)

236 „ The Configuration Menu 43W7774, May 2007