Alteon OS Command Reference

/cfg/l2/trunk <trunk group number>

Trunk Configuration

[Trunk group 1 Menu]

add

- Add port to trunk group

rem

- Remove port from trunk group

ena

- Enable trunk group

dis

- Disable trunk group

del

- Delete trunk group

cur

- Display current Trunk Group configuration

Trunk groups can provide super-bandwidth connections between GbE Switch Modules or other trunk capable devices. A trunk is a group of ports that act together, combining their bandwidth to create a single, larger port. Up to 11 trunk groups can be configured on the GbE Switch Mod- ule, with the following restrictions:

„Any physical switch port can belong to no more than one trunk group.

„Up to four ports/trunks can belong to the same trunk group.

„Configure all ports in a trunk group with the same link configuration (speed, duplex, flow control).

„Trunking from non-Alteon devices must comply with Cisco® EtherChannel® technology.

By default, each trunk group is empty and disabled.

Table 6-42Trunk Configuration Menu Options (/cfg/l2/trunk)

Command Syntax and Usage

add <port alias or number>

Adds a physical port to the current trunk group.

rem <port alias or number>

Removes a physical port from the current trunk group.

ena

Enables the current trunk group.

dis

Disables the current trunk group.

del

Removes the current trunk group configuration.

cur

Displays current trunk group parameters.

43W7774, May 2007

The Configuration Menu „ 235

Page 235
Image 235
Nortel Networks 43W7774 manual 42Trunk Configuration Menu Options /cfg/l2/trunk, Add port alias or number