Nortel Networks 43W7774 manual Fiber Port SFP Status, Information Dump, Info/sfp, Info/dump

Alteon OS Command Reference

/info/sfp

Fiber Port SFP Status

Port Device TX-Enable RX-Signal TX-Fault
---- ------ --------- --------- --------
EXT3	SR-XFP	enabled	LOST	N/A	<= XFP NOT APPROVED
EXT4	CU-SFP	enabled	N/A	none

This command displays the status of the Small Form Pluggable (SFP) module on each Fiber

External Port.

/info/dump

Information Dump

Use the dump command to dump all switch information available from the Information Menu (10K or more, depending on your configuration). This data is useful for tuning and debugging switch performance.

If you want to capture dump data to a file, set your communication software on your worksta- tion to capture session data prior to issuing the dump commands.

122 „ The Information Menu 43W7774, May 2007