Nortel Networks 43W7774 manual Selecting a Software Image to Run

Alteon OS Command Reference

6.The system prompts you to confirm your request.

You should next select a software image to run, as described below.

Selecting a Software Image to Run

You can select which software image (image1 or image2) you want to run in switch mem- ory for the next reboot.

1.At the Boot Options# prompt, enter:

Boot Options# image

2.Enter the name of the image you want the switch to use upon the next boot.

The system informs you of which image is currently set to be loaded at the next reset, and prompts you to enter a new choice:

Currently set to use switch software "image1" on next reset.

Specify new image to use on next reset ["image1"/"image2"]:

334 „ The Boot Options Menu 43W7774, May 2007