Nortel Networks 43W7774 manual Setup, Dump, Cfg/setup, Cfg/dump

Alteon OS Command Reference

/cfg/setup

Setup

The setup program steps you through configuring the system date and time, BOOTP, IP, Span- ning Tree, port speed/mode, VLAN parameters, and IP interfaces.

To start the setup program, at the Configuration# prompt, enter:

Configuration# setup

For a complete description of how to use setup, see Chapter 2, “First-Time Configuration.”

/cfg/dump

Dump

The dump program writes the current switch configuration to the terminal screen. To start the dump program, at the Configuration# prompt, enter:

Configuration# dump

The configuration is displayed with parameters that have been changed from the default val- ues. The screen display can be captured, edited, and placed in a script file, which can be used to configure other switches through a Telnet connection. When using Telnet to configure a new switch, paste the configuration commands from the script file at the command line prompt of the switch. The active configuration can also be saved or loaded via TFTP, as described on page 322.

43W7774, May 2007 The Configuration Menu „ 321