Nortel Networks 43W7774 manual Cfg/sys/ssnmp/snmpv3/comm, SNMPv3 Community Table Configuration

Alteon OS Command Reference

/cfg/sys/ssnmp/snmpv3/comm

SNMPv3 Community Table Configuration

This command is used for configuring the community table entry. The configured entry is stored in the community table list in the SNMP engine. This table is used to configure commu- nity strings in the Local Configuration Datastore (LCD) of SNMP engine.

[SNMPv3 snmpCommunityTable 1		Menu]
index	- Set community	index
name	- Set community	string
uname	- Set USM user name
tag	- Set community	tag
del	- Delete communityTable entry
cur	- Display current communityTable configuration

Table 6-15SNMPv3 Community Table Configuration Menu Options (/cfg/sys/ ssnmp/snmpv3/comm)

Command Syntax and Usage

index <32 character name>

Allows you to configure the unique index value of a row in this table consisting of 32 characters maximum.

name <32 character name>

Defines the user name as defined in /cfg/sys/ssnmp/snmpv3/usm/name on page 193.

uname <32 character name>

Defines a readable 32 character long string that represents the corresponding value of an SNMP community name in a security model.

tag <list of tag string, max 255 characters>

Allows you to configure a tag of up to 255 characters maximum. This tag specifies a set of trans- port endpoints to which a command responder application sends an SNMP trap.

del

Deletes the community table entry.

cur

Displays the community table configuration.

198 „ The Configuration Menu 43W7774, May 2007