Alteon OS Command Reference

Starting Setup When You Log In

The Setup prompt appears automatically whenever you login as the system administrator under the factory default settings.

1.Connect to the switch.

After connecting, the login prompt will appear as shown below.

Enter Password:

2.Enter admin as the default administrator password.

If the factory default configuration is detected, the system prompts:

10Gb Uplink Ethernet Switch Module

18:44:05 Wed Jan 3, 2007

The switch is booted with factory default configuration.

To ease the configuration of the switch, a "Set Up" facility which will prompt you with those configuration items that are essential to the operation of the switch is provided.

Would you like to run "Set Up" to configure the switch? [y/n]:

NOTE – If the default admin login is unsuccessful, or if the administrator Main Menu appears instead, the system configuration has probably been changed from the factory default settings. If you are certain that you need to return the switch to its factory default settings, see “Select- ing a Configuration Block” on page 336.

3.Enter y to begin the initial configuration of the switch, or n to bypass the Setup facility.

43W7774, May 2007

First-Time Configuration „ 33

Page 32 Page 34
Page 33
Image 33
Nortel Networks 43W7774 manual Starting Setup When You Log, Enter admin as the default administrator password
Page 32 Page 34
Top Page Image Contents