Nortel Networks 43W7774 manual 1Switch management on the BladeCenter management module

Alteon OS Command Reference

Figure 1-1Switch management on the BladeCenter management module

4.You can use the default IP addresses provided by the management module, or you can assign a new IP address to the switch module through the management module. You can assign this IP address through one of the following methods:

„Manually through the BladeCenter management module

„Automatically through the IBM Director Configuration Wizard (available in Director release 4.21)

NOTE – If you change the IP address of the GbE Switch Module, make sure that the switch module and the management module both reside on the same subnet.

22 „ The Command Line Interface 43W7774, May 2007