Nortel Networks 43W7774 manual Setting Passwords, Changing the Default Administrator Password

Alteon OS Command Reference

Setting Passwords

It is recommended that you change the user and administrator passwords after initial configu- ration and as regularly as required under your network security policies.

To change the administrator password, you must login using the administrator password.

NOTE – If you forget your administrator password, call your technical support representative for help using the password fix-up mode.

Changing the Default Administrator Password

The administrator has complete access to all menus, information, and configuration com- mands, including the ability to change both the user and administrator passwords.

The default password for the administrator account is admin. To change the default password, follow this procedure:

1.Connect to the switch and log in using the admin password.

2.From the Main Menu, use the following command to access the Configuration Menu:

Main# /cfg

The Configuration Menu is displayed.

[Configuration Menu]
sys	- System-wide Parameter Menu
port	- Port Menu
l2	- Layer 2	Menu
l3	- Layer 3	Menu
qos	- QOS Menu
acl	- Access Control List Menu
pmirr	- Port Mirroring Menu
setup	- Step by	step configuration set up
dump	- Dump current configuration to script file
ptcfg	- Backup current configuration to FTP/TFTP server
gtcfg	- Restore	current configuration from FTP/TFTP server
cur	- Display	current configuration

3.From the Configuration Menu, use the following command to select the System Menu:

>>Configuration# sys

43W7774, May 2007 First-Time Configuration „ 43