Nortel Networks 43W7774 manual Tftp System Dump Put, Maint/cldmp, Clearing Dump Information

Models: 43W7774

1 383
Download 383 pages 59.37 Kb
Page 351
Image 351

Alteon OS Command Reference

/maint/ptdmp <server> <filename>

TFTP System Dump Put

Use this command to put (save) the system dump to a TFTP server.

NOTE If the TFTP server is running SunOS or the Solaris operating system, the specified ptdmp file must exist prior to executing the ptdmp command, and must be writable (set with proper permission, and not locked by any application). The contents of the specified file will be replaced with the current dump data.

To save dump information via TFTP, at the Maintenance# prompt, enter:

Maintenance# ptdmp <server> <filename>

Where server is the TFTP server IP address or hostname, and filename is the target dump file.

/maint/cldmp

Clearing Dump Information

To clear dump information from flash memory, at the Maintenance# prompt, enter:

Maintenance# cldmp

The switch clears the dump region of flash memory and displays the following message:

FLASH dump region cleared.

If the flash dump region is already clear, the switch displays the following message:

FLASH dump region is already clear.

43W7774, May 2007

The Maintenance Menu „ 351

Page 351
Image 351
Nortel Networks 43W7774 manual Tftp System Dump Put, Maint/cldmp, Clearing Dump Information