Nortel Networks 43W7774 manual Cfg/l3/dns, Domain Name System Configuration

Alteon OS Command Reference

/cfg/l3/dns

Domain Name System Configuration

[Domain Name System			Menu]
prima	- Set		IP	address of primary DNS server
secon	- Set		IP	address of secondary DNS server
dname	-	Set default domain name
cur	-	Display current DNS configuration

The Domain Name System (DNS) Menu is used for defining the primary and secondary DNS servers on your local network, and for setting the default domain name served by the switch services. DNS parameters must be configured prior to using hostname parameters with the ping, traceroute, and tftp commands.

Table 6-89Domain Name Service Menu Options (/cfg/l3/dns)

Command Syntax and Usage

prima <IP address (such as 192.4.17.101)>

You will be prompted to set the IP address for your primary DNS server. Use dotted decimal nota- tion.

secon <IP address (such as 192.4.17.101)>

You will be prompted to set the IP address for your secondary DNS server. If the primary DNS server fails, the configured secondary will be used instead. Enter the IP address using dotted deci- mal notation.

dname <dotted DNS notation>none

Sets the default domain name used by the switch.

For example: mycompany.com

cur

Displays the current Domain Name System settings.

292 „ The Configuration Menu 43W7774, May 2007