Siemens 2060isdn manual Basic settings Administrating the list of calls

8.12.98 I_KAP03.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Basic settings

Administrating the list of calls

Calls which do not complete (no connection because busy, no answer) are automatically logged in a list of calls. The list contains up to 10 entries with phone numbers (no repeats) of calls switched via the ISDN exchange.

Activating/deactivating display

You can activate or deactivate display of the list. Display is activated by default.

The comfort mobile unit is idle. You will be prompted to

Ženter the system code in the course of this procedure (default code: “0000”).

					tMeaning: see footnote
.t	Service		t	System settings		t	Device data	t	Disp. call list
		x			Press OK if you merely want to check the setting.
				OK
		u			Press to activate display.
				ON
		u			Press to deactivate display.
				OFF
Deleting numbers from the list of calls
					You can delete individual numbers or the entire list.
					To delete individual numbers from the list
				c	Press the off-hook key

.t Set sys funct.

u NEXT x

	t	List of calls		t	Delete entry
			Select and delete the entry of your choice.
DELETE
			To delete the entire list

Press the off-hook key

c

t

.

Set sys funct. t

u

List of calls			t	Delete all
YES	Press “YES” to confirm and delete all entries in the list of
	calls.
		The “List of calls” is one of the items available
		in the “Service” menu when the mobile unit is
		idle.
		A phone number is automatically deleted from
		the list when the connection is set up.

tmeans: browse with u

Z or u NEXT

and press x

OK to confirm 27