Siemens 2060isdn manual Call duration, System settings t Duration/units

8.12.98 I_KAP03.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Call charges, call duration

Activating/deactivating display of call duration or charges/setting call charge factor

.t Service

tCall duration

Your Gigaset 2060isdn can display either the telephone time units or call charges or the duration of the call. Call- duration display is active by default.

If you need call charges displayed or logged, you must ob- tain the appropriate call data logging function from your network provider. Bear in mind, however, that for billing purposes the units counter of the network provider is al- ways binding.

The display mode you select is valid for all mobile units.

The comfort mobile unit is idle. You will be prompted to

Ženter the system code in the course of this procedure (default code: “0000”).

tMeaning: see footnote

t System settings t Duration/units

This is the menu for choosing display of call duration or call charges. The options at your disposal are as follows:

Activate/deactivate display of call duration

This is a toggle: by activating call-duration display you au- tomatically deactivate display of call charges.

tUnits/charges

Activate/deactivate display of charge units

This is a toggle: by activating charge-unit display you auto- matically deactivate display of call duration.

tChge. unit –.––

t Chge. unit – – –

Select charge factor with decimal point

Every time you change the charge factor the charge totals are reset to zero.

Consequently, you should change the factor only at the end of an accounting period.

Select charge factor without decimal point

Every time you change the charge factor the charge totals are reset to zero.

Consequently, you should change the factor only at the end of an accounting period.

This is the mode for displaying charges in foreign currency units.

tmeans: browse with u

Z or u NEXT

and press x

OK to confirm 47