Siemens 2060isdn manual Connecting the base station

Page 10

8.12.98

I_KAP01.FM5

Gigaset 2060isdn, Inland:

A30853-X210-B101-1-19

Installation

Connecting the base station

Place the base station on a convenient worktop and pro- ceed as follows:

1.Insert the Mini-Western plug of the telephone cable (ISDN cable) into the socket marked “L1” (underside of the base station, see in illustration below).

2.Insert the Mini-Western plug of the AC power adapter

cable into the socket marked “$” (underside of base station, see in illustration below).

3.Push the cables into their slots.

4.Connect the Mini-Western plug of the telephone ca- ble (ISDN cable) to the telephone jack (IAE).

5.Plug the AC power adapter into the 220/230V mains socket.

Your telephone system will not work if the mains power supply fails or if the AC pow- er adapter is not plugged into the mains socket.

Use only the AC power adapter

No. C 39280-Z4-C65 supplied with the base station.

Make sure you connect the telephone cable and the AC power adapter to the correct sockets in the base station. The base sta- tion will not work and may be damaged if you connect the cables to the wrong sock- ets.

120 mm

10

Image 10
Contents Gigaset 2060isdn, Inland Corded terminals can be connectedGetting started Installation steps for the Gigaset 2060isdnGetting started Your corded equipment is now ready for useStandard mobile unit, 2000S OverviewsOverviews Front view Rear view Carry clipOverviews Contents Contents 105 101103 Index 107Safety instructions Safety instructionsCertification for basic access and telephone systems Contents of package Base station InstallationInstallation Base stationConnecting the base station Press the Register button on the base station Initial registrationYour mobile unit is registered and ready for use Register Registering at more than one base station and Gigaset 1000CThen proceed with the base station Installation System code PressNew entry MSN list Installation Saving multiple subscriber numbersService Delete MSNRing allocation Coll. call Installation Ring allocationWall-mounting the base station Entering/changing collective callSelecting the location Tips on where to install the base stationRange Types of connection Point-to-multipoint Important information about Euro-ISDNConnection options base station Point-to-pointFeatures Operating information and error messagesOperation with comfort mobile unit Using the menusOperation with comfort mobile unit Ext. consultat’n Menu structure for system settingsResume Example External consultation in external call Example illustrating the menu hierarchy Idle stateSystem settings t Change sys. code Basic settingsBasic settings Entering/changing the system codeSystem settings Configuration Point to MP Basic settings Setting point-to-multipointLocal op Multicell op System settings Configuration Point to P Basic settings Setting point-to-pointP phonenumber Anonym. call Anonym. answer Basic settings Suppressing phone-number displayActivating/deactivating call pickup Press to activate call pickupActivating/deactivating automatic line seizure Service System settings Device dataPress OK if you merely want to check the setting Call waiting STNBasic settings Administrating the list of calls Incoming calls Incoming callsAnswering/terminating a call Incoming calls Call pickup Internal users MeaningIncoming calls Call pickup from answering machine Answering a waiting call with another call in progressIncoming calls Tracing a call call intercept/MCID Intercept onOutgoing calls Outgoing callsDialing external numbers with the keypad Outgoing calls Viewing/dialing from list of calls List of calls t Display entryCollective call to all mobile units/devices Outgoing calls Dialing internal numbersCalling an internal user Terminating an internal callServicet Anonym. call Outgoing calls Activating Anonymous call for a single callHolding a call Call in progressCall in progress Holding an internal call InternalPress the softkey to reset the dialing function To reset the dialing function deactivate Temp. toneTemp. tone Switching to keypad Call in progress Mute functionInternal consultation/call transfer Switching functionsSwitching functions External consultationToggling between internal and external users TogglingResume Toggling between external usersThree-party conference Ending toggle modeEnding the three-way conference Unparking an external call Switching functions Parking an external callActivating external call forwarding Ox OK Ext./direct Ext./busy Ext./timeoutDeactivating external call forwarding Activating internal call forwarding Deactivating internal call forwardingSwitching functions Activating external automatic callback Deactivating external automatic callbackCall charges, call duration Call charges, call durationDisplaying call charges/call duration Activate/deactivate display of call duration System settings t Duration/unitsCall duration Units/charges Activate/deactivate display of charge unitsCall charges, call duration Lock for outgoing calls system lock/emergency phone numbers LocksLocks Lock on Phone No. list New entry Delete phone NoBlocking unwanted calls System settings Call barring Delete allDelete all lock numbers Lock int2 Lock onSetting user access rights System settings Device data Access rights Internal userSetting internal collective call System settingsSystem settings LineSystem settings Device data Dial * and # System settings Device data Auto. DtmfSystem settings Device data Trunk hold Enabling/disabling trunk holdRing allocation for point-to-multipoint access System settings Reinitializing the base stationReset Deleted Not changed 78901234 45678901 Collective callExample External phone num- bers 78901234 456789001Enter/change collective call Enter/change group callsRing allocation Example External phone No Call groupExample External phone No Call group 12345678 Set call forwarding with group call Group diversion Diversion destSelect Group diversion System settings Unregistering a mobile unit Service UnregisterGigaset 1000C Operation with other mobile unitsOperation with other mobile units Gigaset 2000S 1000SBasic settings # 8 *SC* new SC new SC BOutgoing calls Incoming callsCall in progress Switching functions # 4 1 3O MSNCall charges, call duration LocksOperation with door intercom int. No Multicell operationOperation with supplementary devices Connecting corded devicesOperation with supplementary devices Sockets see illustration,Connecting telephones Setting the device typeConnecting corded devices other than telephones Dialing an external number using the keypad GeneralControlling answering machines/using telephone services Activating anonymous call for a single callSupplementary device is idle Operation with supplementary devices Incoming callsCall pickup/pickup from answering machine Answering call waitingOperation with supplementary devices Switching functions Terminating an internal consultation call Consultation call/call transferStarting an internal consultation call Call transfer without consultationGigaset 2060isdn , Inland Or terminate the three-party conference Toggling with a telephone set to Dtmf dialingThree-party conference Activating external automatic callbackParking an external connection Deactivating external automatic callbackUnparking the external call Operation with door intercoms Examples of how to connect door intercoms via TFEOperation with door intercoms Terminals of the TFE adapter boxRecommendation Ring allocation for the door intercom Connection to comfort mobile unit Connection to supplementary deviceMulticell system General remarks Possible combinationsOrganization of base stations and mobile units 150m Registering comfort mobile units at multiple base stations Multicell system Setting multicell operation Setting automatic base station selection Select station Preferred searchEnable/disable base station change with call in progress Switching to another base station while conducting a callOr switch the call General remarks Activating PBX featuresExample setting up a consultation call Operation behind a private branch exchangeOther Euro-ISDN features System settings Device data Transfer callExamples General notes Ring signalsAcoustic signals General notesGeneral notes System upkeep Technical dataWipe the mobile units and base station clean with a Electrostatic buildupGeneral notes Troubleshooting Problem Possible cause RemedyService hours Monday to Friday Am 7 pm Saturday Am 2 pm General notes WarrantySiemens Service Telephone in Germany Contact partnersCall charge/totals management Frequently asked questionsFrequently asked questions Suppressing transmission of phone numberCallback on Busy Selective call enableAnonymous answer Device type IDParking call transfer on bus Answering machinesMusic on hold Private branch exchange behind Gigaset 2060isdnRoaming Gigaset 2060isdn behind a PBXHandover Automatic call back GlossaryGlossary Call forwarding Call waitingEuro-ISDN Emergency phone numberEn-bloc dialing Extension numberConference System codeThree-party ToggleQuick-reference guide, comfort mobile unit Xz x Dial Quick-reference guide, supplementary device Seize the line and enter the phone number Sion to initiate a three-party conferenceParty’s telephone for this call Park external callGigaset 2000C Special accessoriesSpecial accessories Gigaset 2000HSpecial accessories Gigaset 2000T Gigaset 1000TAEIndex 109110 111 BACKPAGE.FM Siemens Aktiengesellschaft