Siemens 2060isdn manual Call in progress Mute function, Switching to keypad

Page 38

8.12.98

I_KAP03.FM5

Gigaset 2060isdn, Inland:

A30853-X210-B101-1-19

Call in progress

Mute function

If you want to prevent your call partner in an external call hearing you (for example if you want to consult someone in privacy), you can temporarily mute the mobile unit.

tMeaning: see footnote

.t Mute

The call partner can no longer hear you.

You can consult someone in privacy.

Mute off:

.t MICR. ON

The call partner can hear you again. You can switch the mute function on and off as often as you wish.

Switching to keypad

If your Gigaset 2060isdn connects to a PBX or the ISDN exchange responds to KEYPAD commands, you can acti- vate the keypad function in order to send commands to the higher-order system.

Activating keypad with a call in progress

•You are conducting an external call.

.t Keypad on

1... 9:# Enter the keypad information.

.t Keypad off

or

x KEYP. OFF

You can cancel the keypad function via the menu or by pressing the “KEYP. OFF” softkey.

Keypad is off.

Activating keypad before seizing the line

.t Servicet Keypad on

1... 9:#

x DIAL

Enter the keypad information and

Seize the line.

38tmeans: browse with u

Z or u NEXT

and press x

OK to confirm

Image 38

Contents Gigaset 2060isdn, Inland Corded terminals can be connectedGetting started Installation steps for the Gigaset 2060isdnGetting started Your corded equipment is now ready for useStandard mobile unit, 2000S OverviewsOverviews Front view Rear view Carry clipOverviews Contents Contents 105 101103 Index 107Certification for basic access and telephone systems Safety instructionsSafety instructions Contents of package Base station InstallationInstallation Base stationConnecting the base station Your mobile unit is registered and ready for use Initial registrationPress the Register button on the base station Then proceed with the base station Registering at more than one base station and Gigaset 1000CRegister Installation System code PressNew entry MSN list Installation Saving multiple subscriber numbersService Delete MSNRing allocation Coll. call Installation Ring allocationWall-mounting the base station Entering/changing collective callRange Tips on where to install the base stationSelecting the location Types of connection Point-to-multipoint Important information about Euro-ISDNConnection options base station Point-to-pointFeatures Operating information and error messagesOperation with comfort mobile unit Using the menusOperation with comfort mobile unit Resume Example External consultation in external call Menu structure for system settingsExt. consultat’n Example illustrating the menu hierarchy Idle stateSystem settings t Change sys. code Basic settingsBasic settings Entering/changing the system codeLocal op Multicell op Basic settings Setting point-to-multipointSystem settings Configuration Point to MP P phonenumber Basic settings Setting point-to-pointSystem settings Configuration Point to P Anonym. call Anonym. answer Basic settings Suppressing phone-number displayActivating/deactivating call pickup Press to activate call pickupActivating/deactivating automatic line seizure Service System settings Device dataPress OK if you merely want to check the setting Call waiting STNBasic settings Administrating the list of calls Answering/terminating a call Incoming callsIncoming calls Incoming calls Call pickup Internal users MeaningIncoming calls Call pickup from answering machine Answering a waiting call with another call in progressIncoming calls Tracing a call call intercept/MCID Intercept onDialing external numbers with the keypad Outgoing callsOutgoing calls Outgoing calls Viewing/dialing from list of calls List of calls t Display entryCollective call to all mobile units/devices Outgoing calls Dialing internal numbersCalling an internal user Terminating an internal call Servicet Anonym. call Outgoing calls Activating Anonymous call for a single callHolding a call Call in progressCall in progress Holding an internal call InternalTemp. tone To reset the dialing function deactivate Temp. tonePress the softkey to reset the dialing function Switching to keypad Call in progress Mute functionInternal consultation/call transfer Switching functionsSwitching functions External consultationToggling between internal and external users TogglingResume Toggling between external usersEnding the three-way conference Ending toggle modeThree-party conference Activating external call forwarding Switching functions Parking an external callUnparking an external call Deactivating external call forwarding Ext./direct Ext./busy Ext./timeoutOx OK Activating internal call forwarding Deactivating internal call forwardingSwitching functions Activating external automatic callback Deactivating external automatic callbackDisplaying call charges/call duration Call charges, call durationCall charges, call duration Activate/deactivate display of call duration System settings t Duration/unitsCall duration Units/charges Activate/deactivate display of charge unitsCall charges, call duration Lock for outgoing calls system lock/emergency phone numbers LocksLocks Lock on Phone No. list New entry Delete phone NoBlocking unwanted calls System settings Call barring Delete allDelete all lock numbers Lock int2 Lock onSetting user access rights System settings Device data Access rights Internal userSetting internal collective call System settingsSystem settings LineSystem settings Device data Dial * and # System settings Device data Auto. DtmfSystem settings Device data Trunk hold Enabling/disabling trunk holdReset Deleted Not changed System settings Reinitializing the base stationRing allocation for point-to-multipoint access 78901234 45678901 Collective callExample External phone num- bers 78901234 456789001Enter/change collective call Enter/change group callsExample External phone No Call group 12345678 Example External phone No Call groupRing allocation Select Group diversion Diversion destSet call forwarding with group call Group diversion System settings Unregistering a mobile unit Service UnregisterGigaset 1000C Operation with other mobile unitsOperation with other mobile units Gigaset 2000S 1000SBasic settings # 8 *SC* new SC new SC BCall in progress Incoming callsOutgoing calls Switching functions # 4 1 3O MSNCall charges, call duration LocksOperation with door intercom int. No Multicell operationOperation with supplementary devices Connecting corded devicesOperation with supplementary devices Sockets see illustration,Connecting corded devices other than telephones Setting the device typeConnecting telephones Dialing an external number using the keypad GeneralControlling answering machines/using telephone services Activating anonymous call for a single callSupplementary device is idle Operation with supplementary devices Incoming callsCall pickup/pickup from answering machine Answering call waitingOperation with supplementary devices Switching functions Terminating an internal consultation call Consultation call/call transferStarting an internal consultation call Call transfer without consultationGigaset 2060isdn , Inland Or terminate the three-party conference Toggling with a telephone set to Dtmf dialingThree-party conference Activating external automatic callbackUnparking the external call Deactivating external automatic callbackParking an external connection Operation with door intercoms Examples of how to connect door intercoms via TFEOperation with door intercoms Terminals of the TFE adapter boxRecommendation Ring allocation for the door intercom Connection to comfort mobile unit Connection to supplementary deviceMulticell system Organization of base stations and mobile units Possible combinationsGeneral remarks 150m Registering comfort mobile units at multiple base stations Multicell system Setting multicell operation Setting automatic base station selection Select station Preferred searchEnable/disable base station change with call in progress Switching to another base station while conducting a callOr switch the call General remarks Activating PBX featuresExample setting up a consultation call Operation behind a private branch exchangeExamples System settings Device data Transfer callOther Euro-ISDN features General notes Ring signalsAcoustic signals General notesGeneral notes System upkeep Technical dataWipe the mobile units and base station clean with a Electrostatic buildupGeneral notes Troubleshooting Problem Possible cause RemedyService hours Monday to Friday Am 7 pm Saturday Am 2 pm General notes WarrantySiemens Service Telephone in Germany Contact partnersCall charge/totals management Frequently asked questionsFrequently asked questions Suppressing transmission of phone numberCallback on Busy Selective call enableAnonymous answer Device type IDParking call transfer on bus Answering machinesMusic on hold Private branch exchange behind Gigaset 2060isdnHandover Gigaset 2060isdn behind a PBXRoaming Automatic call back GlossaryGlossary Call forwarding Call waitingEuro-ISDN Emergency phone numberEn-bloc dialing Extension numberConference System codeThree-party ToggleQuick-reference guide, comfort mobile unit Xz x Dial Quick-reference guide, supplementary device Seize the line and enter the phone number Sion to initiate a three-party conferenceParty’s telephone for this call Park external callGigaset 2000C Special accessoriesSpecial accessories Gigaset 2000HSpecial accessories Gigaset 2000T Gigaset 1000TAEIndex 109110 111 BACKPAGE.FM Siemens Aktiengesellschaft