Siemens 2060isdn manual Call charges, call duration

Page 48

8.12.98

I_KAP03.FM5

Gigaset 2060isdn, Inland:

A30853-X210-B101-1-19

Call charges, call duration

tCharge redisplay

tTotal

tTotal per unit

Activate/deactivate display of charge for most recent call

(Call-charge display must be activated.)

If this function is activated the charge for the most recent call is displayed as soon as the trunk is seized for a call. Practical in the catering trade, for example, because the charge for a call placed by a guest can be checked right away. See “Deleting total” for instructions on resetting the call charge display.

Check charge totals per multiple subscriber number or delete per MSN.

Use “NEXT” to browse through the individual multiple subscriber numbers.

The last value in the list is the grand total for the base sta- tion.

Check charge totals per registered mobile unit or con- nected device, i.e. per internal user, and delete single to- tals.

All running totals are deleted when you re-enter or change the charge factor.

If you want to reactivate call-units display, enter “0.00” as the new charge factor.

The charge factor is progammable in the range 9.99 to 999: the setting is valid for all users.

48

Image 48

Contents Gigaset 2060isdn, Inland Corded terminals can be connectedInstallation steps for the Gigaset 2060isdn Getting startedGetting started Your corded equipment is now ready for useOverviews OverviewsStandard mobile unit, 2000S Front view Rear view Carry clipOverviews Contents Contents 101 103105 Index 107Safety instructions Safety instructionsCertification for basic access and telephone systems Installation InstallationContents of package Base station Base stationConnecting the base station Initial registration Press the Register button on the base stationYour mobile unit is registered and ready for use Registering at more than one base station and Gigaset 1000C RegisterThen proceed with the base station Installation System code PressInstallation Saving multiple subscriber numbers ServiceNew entry MSN list Delete MSNInstallation Ring allocation Wall-mounting the base stationRing allocation Coll. call Entering/changing collective callTips on where to install the base station Selecting the locationRange Important information about Euro-ISDN Connection options base stationTypes of connection Point-to-multipoint Point-to-pointFeatures Operating information and error messagesUsing the menus Operation with comfort mobile unitOperation with comfort mobile unit Menu structure for system settings Ext. consultat’nResume Example External consultation in external call Example illustrating the menu hierarchy Idle stateBasic settings Basic settingsSystem settings t Change sys. code Entering/changing the system codeBasic settings Setting point-to-multipoint System settings Configuration Point to MPLocal op Multicell op Basic settings Setting point-to-point System settings Configuration Point to PP phonenumber Basic settings Suppressing phone-number display Activating/deactivating call pickupAnonym. call Anonym. answer Press to activate call pickupService System settings Device data Press OK if you merely want to check the settingActivating/deactivating automatic line seizure Call waiting STNBasic settings Administrating the list of calls Incoming calls Incoming callsAnswering/terminating a call Incoming calls Call pickup Internal users MeaningIncoming calls Call pickup from answering machine Answering a waiting call with another call in progressIncoming calls Tracing a call call intercept/MCID Intercept onOutgoing calls Outgoing callsDialing external numbers with the keypad Outgoing calls Viewing/dialing from list of calls List of calls t Display entryOutgoing calls Dialing internal numbers Calling an internal userCollective call to all mobile units/devices Terminating an internal callServicet Anonym. call Outgoing calls Activating Anonymous call for a single callCall in progress Call in progressHolding a call Holding an internal call InternalTo reset the dialing function deactivate Temp. tone Press the softkey to reset the dialing functionTemp. tone Switching to keypad Call in progress Mute functionSwitching functions Switching functionsInternal consultation/call transfer External consultationToggling ResumeToggling between internal and external users Toggling between external usersEnding toggle mode Three-party conferenceEnding the three-way conference Switching functions Parking an external call Unparking an external callActivating external call forwarding Ext./direct Ext./busy Ext./timeout Ox OKDeactivating external call forwarding Activating internal call forwarding Deactivating internal call forwarding Switching functions Activating external automatic callback Deactivating external automatic callbackCall charges, call duration Call charges, call durationDisplaying call charges/call duration System settings t Duration/units Call durationActivate/deactivate display of call duration Units/charges Activate/deactivate display of charge unitsCall charges, call duration Locks LocksLock for outgoing calls system lock/emergency phone numbers Lock on Phone No. list New entry Delete phone NoSystem settings Call barring Delete all Delete all lock numbersBlocking unwanted calls Lock int2 Lock onSetting user access rights System settings Device data Access rights Internal userSystem settings System settingsSetting internal collective call LineSystem settings Device data Auto. Dtmf System settings Device data Trunk holdSystem settings Device data Dial * and # Enabling/disabling trunk holdSystem settings Reinitializing the base station Ring allocation for point-to-multipoint accessReset Deleted Not changed Collective call Example External phone num- bers78901234 45678901 78901234 456789001Enter/change collective call Enter/change group callsExample External phone No Call group Ring allocationExample External phone No Call group 12345678 Diversion dest Set call forwarding with group call Group diversionSelect Group diversion System settings Unregistering a mobile unit Service UnregisterOperation with other mobile units Operation with other mobile unitsGigaset 1000C Gigaset 2000S 1000SBasic settings # 8 *SC* new SC new SC BIncoming calls Outgoing callsCall in progress Switching functions # 4 1 3O MSNCall charges, call duration LocksOperation with door intercom int. No Multicell operationConnecting corded devices Operation with supplementary devicesOperation with supplementary devices Sockets see illustration,Setting the device type Connecting telephonesConnecting corded devices other than telephones Dialing an external number using the keypad GeneralControlling answering machines/using telephone services Activating anonymous call for a single callOperation with supplementary devices Incoming calls Call pickup/pickup from answering machineSupplementary device is idle Answering call waitingOperation with supplementary devices Switching functions Consultation call/call transfer Starting an internal consultation callTerminating an internal consultation call Call transfer without consultationGigaset 2060isdn , Inland Toggling with a telephone set to Dtmf dialing Three-party conferenceOr terminate the three-party conference Activating external automatic callbackDeactivating external automatic callback Parking an external connectionUnparking the external call Examples of how to connect door intercoms via TFE Operation with door intercomsOperation with door intercoms Terminals of the TFE adapter boxRecommendation Ring allocation for the door intercom Connection to comfort mobile unit Connection to supplementary deviceMulticell system Possible combinations General remarksOrganization of base stations and mobile units 150m Registering comfort mobile units at multiple base stations Multicell system Setting multicell operation Setting automatic base station selection Select station Preferred searchEnable/disable base station change with call in progress Switching to another base station while conducting a callGeneral remarks Activating PBX features Example setting up a consultation callOr switch the call Operation behind a private branch exchangeSystem settings Device data Transfer call Other Euro-ISDN featuresExamples Ring signals Acoustic signalsGeneral notes General notesTechnical data Wipe the mobile units and base station clean with aGeneral notes System upkeep Electrostatic buildupGeneral notes Troubleshooting Problem Possible cause RemedyGeneral notes Warranty Siemens Service Telephone in GermanyService hours Monday to Friday Am 7 pm Saturday Am 2 pm Contact partnersFrequently asked questions Frequently asked questionsCall charge/totals management Suppressing transmission of phone numberSelective call enable Anonymous answerCallback on Busy Device type IDAnswering machines Music on holdParking call transfer on bus Private branch exchange behind Gigaset 2060isdnGigaset 2060isdn behind a PBX RoamingHandover Glossary GlossaryAutomatic call back Call forwarding Call waitingEmergency phone number En-bloc dialingEuro-ISDN Extension numberSystem code Three-partyConference ToggleQuick-reference guide, comfort mobile unit Xz x Dial Quick-reference guide, supplementary device Sion to initiate a three-party conference Party’s telephone for this callSeize the line and enter the phone number Park external callSpecial accessories Special accessoriesGigaset 2000C Gigaset 2000HSpecial accessories Gigaset 2000T Gigaset 1000TAEIndex 109110 111 BACKPAGE.FM Siemens Aktiengesellschaft