Siemens 2060isdn manual Setting the device type, Connecting telephones

8.12.98 I_KAP04.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Operation with supplementary devices

Setting the device type

“Telephone” is the default device type for corded supple- mentary devices. You should connect a modem or fax ma- chine to socket 0 by preference, and if you connect a door intercom you must use socket 9.

The comfort mobile unit is idle. You will be prompted to

Ženter the system code in the course of this procedure (default code: “0000”).

.t

Service

t

System settings

t

Device data

t

a/b line

Set corded user lines (a/b lines):

t

tMeaning: see footnote

a/b line 0

Select a supplementary-device line. The alternatives are

a/b line 0 and a/b line 9.

u

x

Select a device type from the “Device type” menu and

NEXT

SAVE

save your choice. The current setting is marked “active”.

Connecting telephones

You can connect a telephone to either of these lines and begin using it right away - no settings are necessary. It is not necessary to register the telephone or other corded device at the base station.

Deactivate “automatic line seizure” (➔ page 26) if you have a corded telephone connected to the base station.

The dialing method (pulse or tone dialing) is recognized automatically. It is not possible to set up two connections simultaneously using two corded devices.

The Signal key of a telephone connected to Gigaset 2060isdn has no function (exception: DTMF telephones).

Call charges are not displayed on the telephone. The call charges incurred, however, are regis- tered by the system. The call-charge totals per user and multiple subscriber number can be viewed and deleted with the aid of a mobile unit registered at the base station.

Connecting corded devices (other than telephones)

You can use a mobile unit registered at the base station to enter the requisite settings for the supplementary device. Activate “automatic line seizure” (➔ page 26) if you have a fax and/or modem connected to the base station.

You can define the device you connect to the base station as a fax machine, modem, videotex decoder, door intercom or answering machine (➔ page 68).

You can also set other user-specific parameters such as access rights, ring allocation and so on for each supplementary device with the aid of a mobile unit.

A fax machine connected to a Gigaset 2060isdn must be configured for operation with a private branch exchange (see the User Guide for your fax machine).

The maximum data-transfer rates you can use with the a/b lines are as follows:

●Socket B (top), internal number 0: max. 28 800 baud

68tmeans: browse with u

Z or u NEXT

and press x

OK

to confirm