Siemens 2060isdn manual Operation with other mobile units, Gigaset 1000C, Gigaset 2000S 1000S

Page 61

8.12.98

I_KAP03A.FM5

Gigaset 2060isdn, Inland:

A30853-X210-B101-1-19

Operation with other mobile units

Operation with other mobile units

Gigaset 1000C

All the Gigaset 2060isdn functions are at your disposal with the Gigaset 1000C, except for those listed below.

Procedures that cannot be used with Gigaset 1000C:

Display name

Copy contents of telephone book from mobile unit to mobile unit

There are also some differences between the keypad lay- outs that you should bear in mind, although these differ- ences have no major effect on use:

Differences between the keypads

 

 

 

Key

 

Gigaset 1000 C

 

 

Gigaset 2000C

 

 

 

 

 

 

 

 

 

 

Line seize key

 

a

 

 

c or a

Menu key

 

ß

 

 

.

Internal key

 

ü

 

 

 

 

softkey

 

 

 

 

INT

 

 

 

 

 

 

 

 

Gigaset 2000S (1000S)

All the Gigaset 2060isdn functions are at your disposal with the Gigaset 2000S (1000S), except for that stated be- low.

Procedure that cannot be used with Gigaset 2000S (1000S):

List of calls

There are also some differences between the keypad lay- outs that you should bear in mind, although these differ- ences have no major effect on use:

Differences between the keypads

 

 

Key

 

Gigaset 1000S

 

Gigaset 2000S

 

 

 

 

 

 

 

Line seize key

 

a

 

c or a

All the procedures you can use with Gigaset 2000S (1000S) are outlined below (short-form descriptions). Please consult the various sections of the Gigaset 2000C comfort mobile unit User Guide if you require more de- tailed information.

61

Image 61
Contents Corded terminals can be connected Gigaset 2060isdn, InlandGetting started Installation steps for the Gigaset 2060isdnGetting started Your corded equipment is now ready for useOverviews OverviewsStandard mobile unit, 2000S Front view Rear view Carry clipOverviews Contents Contents 103 101105 Index 107Safety instructions Safety instructionsCertification for basic access and telephone systems Installation InstallationContents of package Base station Base stationConnecting the base station Press the Register button on the base station Initial registrationYour mobile unit is registered and ready for use Register Registering at more than one base station and Gigaset 1000CThen proceed with the base station Press Installation System codeService Installation Saving multiple subscriber numbersNew entry MSN list Delete MSNWall-mounting the base station Installation Ring allocationRing allocation Coll. call Entering/changing collective callSelecting the location Tips on where to install the base stationRange Connection options base station Important information about Euro-ISDNTypes of connection Point-to-multipoint Point-to-pointOperating information and error messages FeaturesOperation with comfort mobile unit Using the menusOperation with comfort mobile unit Ext. consultat’n Menu structure for system settingsResume Example External consultation in external call Idle state Example illustrating the menu hierarchyBasic settings Basic settingsSystem settings t Change sys. code Entering/changing the system codeSystem settings Configuration Point to MP Basic settings Setting point-to-multipointLocal op Multicell op System settings Configuration Point to P Basic settings Setting point-to-pointP phonenumber Activating/deactivating call pickup Basic settings Suppressing phone-number displayAnonym. call Anonym. answer Press to activate call pickupPress OK if you merely want to check the setting Service System settings Device dataActivating/deactivating automatic line seizure Call waiting STNBasic settings Administrating the list of calls Incoming calls Incoming callsAnswering/terminating a call Internal users Meaning Incoming calls Call pickupAnswering a waiting call with another call in progress Incoming calls Call pickup from answering machineIntercept on Incoming calls Tracing a call call intercept/MCIDOutgoing calls Outgoing callsDialing external numbers with the keypad List of calls t Display entry Outgoing calls Viewing/dialing from list of callsCalling an internal user Outgoing calls Dialing internal numbersCollective call to all mobile units/devices Terminating an internal callOutgoing calls Activating Anonymous call for a single call Servicet Anonym. callCall in progress Call in progressHolding a call Holding an internal call InternalPress the softkey to reset the dialing function To reset the dialing function deactivate Temp. toneTemp. tone Call in progress Mute function Switching to keypadSwitching functions Switching functionsInternal consultation/call transfer External consultationResume TogglingToggling between internal and external users Toggling between external usersThree-party conference Ending toggle modeEnding the three-way conference Unparking an external call Switching functions Parking an external callActivating external call forwarding Ox OK Ext./direct Ext./busy Ext./timeoutDeactivating external call forwarding Deactivating internal call forwarding Activating internal call forwardingDeactivating external automatic callback Switching functions Activating external automatic callbackCall charges, call duration Call charges, call durationDisplaying call charges/call duration Call duration System settings t Duration/unitsActivate/deactivate display of call duration Units/charges Activate/deactivate display of charge unitsCall charges, call duration Locks LocksLock for outgoing calls system lock/emergency phone numbers Lock on Phone No. list New entry Delete phone NoDelete all lock numbers System settings Call barring Delete allBlocking unwanted calls Lock int2 Lock onSetting user access rights Internal user System settings Device data Access rightsSystem settings System settingsSetting internal collective call LineSystem settings Device data Trunk hold System settings Device data Auto. DtmfSystem settings Device data Dial * and # Enabling/disabling trunk holdRing allocation for point-to-multipoint access System settings Reinitializing the base stationReset Deleted Not changed Example External phone num- bers Collective call78901234 45678901 78901234 456789001Enter/change group calls Enter/change collective callRing allocation Example External phone No Call groupExample External phone No Call group 12345678 Set call forwarding with group call Group diversion Diversion destSelect Group diversion Service Unregister System settings Unregistering a mobile unitOperation with other mobile units Operation with other mobile unitsGigaset 1000C Gigaset 2000S 1000S# 8 *SC* new SC new SC B Basic settingsOutgoing calls Incoming callsCall in progress # 4 1 3O MSN Switching functionsLocks Call charges, call durationMulticell operation Operation with door intercom int. NoOperation with supplementary devices Connecting corded devicesOperation with supplementary devices Sockets see illustration,Connecting telephones Setting the device typeConnecting corded devices other than telephones General Dialing an external number using the keypadActivating anonymous call for a single call Controlling answering machines/using telephone servicesCall pickup/pickup from answering machine Operation with supplementary devices Incoming callsSupplementary device is idle Answering call waitingOperation with supplementary devices Switching functions Starting an internal consultation call Consultation call/call transferTerminating an internal consultation call Call transfer without consultationGigaset 2060isdn , Inland Three-party conference Toggling with a telephone set to Dtmf dialingOr terminate the three-party conference Activating external automatic callbackParking an external connection Deactivating external automatic callbackUnparking the external call Operation with door intercoms Examples of how to connect door intercoms via TFEOperation with door intercoms Terminals of the TFE adapter boxRecommendation Ring allocation for the door intercom Connection to supplementary device Connection to comfort mobile unitMulticell system General remarks Possible combinationsOrganization of base stations and mobile units 150m Registering comfort mobile units at multiple base stations Multicell system Setting multicell operation Preferred search Setting automatic base station selection Select stationSwitching to another base station while conducting a call Enable/disable base station change with call in progressExample setting up a consultation call General remarks Activating PBX featuresOr switch the call Operation behind a private branch exchangeOther Euro-ISDN features System settings Device data Transfer callExamples Acoustic signals Ring signalsGeneral notes General notesWipe the mobile units and base station clean with a Technical dataGeneral notes System upkeep Electrostatic buildupProblem Possible cause Remedy General notes TroubleshootingSiemens Service Telephone in Germany General notes WarrantyService hours Monday to Friday Am 7 pm Saturday Am 2 pm Contact partnersFrequently asked questions Frequently asked questionsCall charge/totals management Suppressing transmission of phone numberAnonymous answer Selective call enableCallback on Busy Device type IDMusic on hold Answering machinesParking call transfer on bus Private branch exchange behind Gigaset 2060isdnRoaming Gigaset 2060isdn behind a PBXHandover Glossary GlossaryAutomatic call back Call forwarding Call waitingEn-bloc dialing Emergency phone numberEuro-ISDN Extension numberThree-party System codeConference ToggleQuick-reference guide, comfort mobile unit Xz x Dial Quick-reference guide, supplementary device Party’s telephone for this call Sion to initiate a three-party conferenceSeize the line and enter the phone number Park external callSpecial accessories Special accessoriesGigaset 2000C Gigaset 2000HGigaset 1000TAE Special accessories Gigaset 2000T109 Index110 111 Siemens Aktiengesellschaft BACKPAGE.FM