Siemens 2060isdn manual Call charges, call duration, Locks

Page 65

8.12.98

I_KAP03A.FM5

Gigaset 2060isdn, Inland:

A30853-X210-B101-1-19

Operation with other mobile units

Call charges, call duration

Call charge and call duration display off	B# 1 SC*)	9 60B
call duration on / call charge on	B# 1 SC*)	9 6 1 / 2B
Set charge factor	B# 8 2SC*)		<charge factor> B
Display/delete charge totals	B# 8 3SC*)		<INT No.> (or *for MSN 0B
Activate/deactivate call charge display on	B# 1 SC*)	* 0 1 / 0B
line seizure

*) SC = system code of the base station (default code: “0000”)
Locks

Activate/deactivate system lock	B# 2 4 SC*)		1/ 0 B
Set access rights: trunk/incoming only/inter-	B# 1 SC*)	O* 1 0 /		1 / 2B
nal only

Lock numbers for call barring
Activate/deactivate	B# 8 4 SC*) <INT No.> 1 /			0 B
Program (3 lock numbers, max. 8 digits per	B# 8 5 SC*) <INT No.> O <lock No.>B
number)
Delete all	B# 8 7 SC*) <INT No.>B
Emergency phone numbers
Program (4 phone numbers, max. 16 digits	B# 2 5O<phone No.>B
per number)
Delete all	B# 2 7B
Block unwanted calls
Program (3 phone numbers, max. 16 digits	B# 4 5O <phone No.>B
per number)
Activate/deactivate	B# 4 4 1 / 0 B

*) SC = system code of the base station (default code: “0000”)

65

Image 65

Contents Corded terminals can be connected Gigaset 2060isdn, InlandGetting started Installation steps for the Gigaset 2060isdnGetting started Your corded equipment is now ready for useOverviews OverviewsStandard mobile unit, 2000S Front view Rear view Carry clipOverviews Contents Contents 103 101105 Index 107Certification for basic access and telephone systems Safety instructionsSafety instructions Installation InstallationContents of package Base station Base stationConnecting the base station Your mobile unit is registered and ready for use Initial registrationPress the Register button on the base station Then proceed with the base station Registering at more than one base station and Gigaset 1000CRegister Press Installation System codeService Installation Saving multiple subscriber numbersNew entry MSN list Delete MSNWall-mounting the base station Installation Ring allocationRing allocation Coll. call Entering/changing collective callRange Tips on where to install the base stationSelecting the location Connection options base station Important information about Euro-ISDNTypes of connection Point-to-multipoint Point-to-pointOperating information and error messages FeaturesOperation with comfort mobile unit Using the menusOperation with comfort mobile unit Resume Example External consultation in external call Menu structure for system settingsExt. consultat’n Idle state Example illustrating the menu hierarchyBasic settings Basic settingsSystem settings t Change sys. code Entering/changing the system codeLocal op Multicell op Basic settings Setting point-to-multipointSystem settings Configuration Point to MP P phonenumber Basic settings Setting point-to-pointSystem settings Configuration Point to P Activating/deactivating call pickup Basic settings Suppressing phone-number displayAnonym. call Anonym. answer Press to activate call pickupPress OK if you merely want to check the setting Service System settings Device dataActivating/deactivating automatic line seizure Call waiting STNBasic settings Administrating the list of calls Answering/terminating a call Incoming callsIncoming calls Internal users Meaning Incoming calls Call pickupAnswering a waiting call with another call in progress Incoming calls Call pickup from answering machineIntercept on Incoming calls Tracing a call call intercept/MCIDDialing external numbers with the keypad Outgoing callsOutgoing calls List of calls t Display entry Outgoing calls Viewing/dialing from list of callsCalling an internal user Outgoing calls Dialing internal numbersCollective call to all mobile units/devices Terminating an internal callOutgoing calls Activating Anonymous call for a single call Servicet Anonym. callCall in progress Call in progressHolding a call Holding an internal call InternalTemp. tone To reset the dialing function deactivate Temp. tonePress the softkey to reset the dialing function Call in progress Mute function Switching to keypadSwitching functions Switching functionsInternal consultation/call transfer External consultationResume TogglingToggling between internal and external users Toggling between external usersEnding the three-way conference Ending toggle modeThree-party conference Activating external call forwarding Switching functions Parking an external callUnparking an external call Deactivating external call forwarding Ext./direct Ext./busy Ext./timeoutOx OK Deactivating internal call forwarding Activating internal call forwardingDeactivating external automatic callback Switching functions Activating external automatic callbackDisplaying call charges/call duration Call charges, call durationCall charges, call duration Call duration System settings t Duration/unitsActivate/deactivate display of call duration Units/charges Activate/deactivate display of charge unitsCall charges, call duration Locks LocksLock for outgoing calls system lock/emergency phone numbers Lock on Phone No. list New entry Delete phone NoDelete all lock numbers System settings Call barring Delete allBlocking unwanted calls Lock int2 Lock onSetting user access rights Internal user System settings Device data Access rightsSystem settings System settingsSetting internal collective call LineSystem settings Device data Trunk hold System settings Device data Auto. DtmfSystem settings Device data Dial * and # Enabling/disabling trunk holdReset Deleted Not changed System settings Reinitializing the base stationRing allocation for point-to-multipoint access Example External phone num- bers Collective call78901234 45678901 78901234 456789001Enter/change group calls Enter/change collective callExample External phone No Call group 12345678 Example External phone No Call groupRing allocation Select Group diversion Diversion destSet call forwarding with group call Group diversion Service Unregister System settings Unregistering a mobile unitOperation with other mobile units Operation with other mobile unitsGigaset 1000C Gigaset 2000S 1000S # 8 *SC* new SC new SC B Basic settingsCall in progress Incoming callsOutgoing calls # 4 1 3O MSN Switching functionsLocks Call charges, call durationMulticell operation Operation with door intercom int. NoOperation with supplementary devices Connecting corded devicesOperation with supplementary devices Sockets see illustration,Connecting corded devices other than telephones Setting the device typeConnecting telephones General Dialing an external number using the keypadActivating anonymous call for a single call Controlling answering machines/using telephone servicesCall pickup/pickup from answering machine Operation with supplementary devices Incoming callsSupplementary device is idle Answering call waitingOperation with supplementary devices Switching functions Starting an internal consultation call Consultation call/call transferTerminating an internal consultation call Call transfer without consultationGigaset 2060isdn , Inland Three-party conference Toggling with a telephone set to Dtmf dialingOr terminate the three-party conference Activating external automatic callbackUnparking the external call Deactivating external automatic callbackParking an external connection Operation with door intercoms Examples of how to connect door intercoms via TFEOperation with door intercoms Terminals of the TFE adapter boxRecommendation Ring allocation for the door intercom Connection to supplementary device Connection to comfort mobile unitMulticell system Organization of base stations and mobile units Possible combinationsGeneral remarks 150m Registering comfort mobile units at multiple base stations Multicell system Setting multicell operation Preferred search Setting automatic base station selection Select stationSwitching to another base station while conducting a call Enable/disable base station change with call in progressExample setting up a consultation call General remarks Activating PBX featuresOr switch the call Operation behind a private branch exchangeExamples System settings Device data Transfer callOther Euro-ISDN features Acoustic signals Ring signalsGeneral notes General notesWipe the mobile units and base station clean with a Technical dataGeneral notes System upkeep Electrostatic buildupProblem Possible cause Remedy General notes TroubleshootingSiemens Service Telephone in Germany General notes WarrantyService hours Monday to Friday Am 7 pm Saturday Am 2 pm Contact partnersFrequently asked questions Frequently asked questionsCall charge/totals management Suppressing transmission of phone numberAnonymous answer Selective call enableCallback on Busy Device type IDMusic on hold Answering machinesParking call transfer on bus Private branch exchange behind Gigaset 2060isdnHandover Gigaset 2060isdn behind a PBXRoaming Glossary GlossaryAutomatic call back Call forwarding Call waitingEn-bloc dialing Emergency phone numberEuro-ISDN Extension numberThree-party System codeConference ToggleQuick-reference guide, comfort mobile unit Xz x Dial Quick-reference guide, supplementary device Party’s telephone for this call Sion to initiate a three-party conferenceSeize the line and enter the phone number Park external callSpecial accessories Special accessoriesGigaset 2000C Gigaset 2000HGigaset 1000TAE Special accessories Gigaset 2000T109 Index110 111 Siemens Aktiengesellschaft BACKPAGE.FM